Insignia NS-RGFESS1-C User Manual Download Page 7

www.insigniaproducts.com

7

4.8 Cu. Ft. Electric Convection Range with Steam Cleaning

Critical installation warnings

WARNING

• This appliance must be installed by a qualified technician or service company.

• Failing to have a qualified technician install the range may result in electric shock, fire, an explosion, problems with 

the product, or injury.

• Unpack the oven, remove all packaging material and examine the oven for any damage such as dents on the interior or 

exterior of the oven, broken door latches, cracks in the door, or a door that is not lined up correctly. If there is any 
damage, do not operate the oven and notify your dealer immediately.

• Plug the power cord into a properly grounded outlet with the proper configuration. Your oven should be the only item 

connected to this circuit.

• Keep all packaging materials out of the reach of children. Children may use them for play and injure themselves.
• Install your appliance on a level and hard floor that can support its weight.

• Failing to do so may result in abnormal vibrations, noise, or problems with the product.

• This appliance must be properly grounded.
• Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

• This may result in electric shock, fire, an explosion, or problems with the product.

• Do not cut or remove the ground prong from the power cord under any circumstances.
• Connect the range to a circuit that provides the correct amperage.
• Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to direct sunlight or water (rain 

drops).

• This may result in electric shock or fire.

• Do not use a damaged power cord or loose wall socket.

• This may result in electric shock or fire.

• Do not pull or excessively bend the power cord.
• Do not twist or tie the power cord.
• Do not hook the power cord over a metal object or insert the power cord between objects.

• This may result in electric shock or fire.

• If the power cord is damaged, contact your nearest service center.

Critical installation warnings

CAUTION

• If the appliance is flooded by any liquid, disconnect the appliance from power by turning off the circuit breaker that is 

powering it. Please contact your nearest service center. Failing to do so may result in electric shock or fire.

• If the appliance produces a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact 

your nearest service center.

• Failing to do so may result in electric shock or fire.

• Do not touch the power cord. Do not touch the appliance.

• A spark may result in an explosion or fire.

• Take care not to contact the oven door, heating elements, or any of the other hot parts with your body while cooking or 

just after cooking.

• Failing to do so may result in burns.

• If materials inside the oven should ignite, keep the oven door closed, turn the oven off and disconnect the power cord, 

or shut off power at the fuse or circuit breaker panel. If the door is opened, the fire may spread.

• Always observe safety precautions when using your oven. Never try to repair the oven on your own - there is 

dangerous voltage inside. If the oven needs to be repaired, contact an authorized service center near you.

• If you use the appliance when it is contaminated by foreign substances such as food waste, it may result in a problem 

with the appliance.

• Take care when removing the wrapping from food taken out of the appliance.

• If the food is hot, hot steam may be emitted abruptly when you remove the wrapping and this may result in burns.

• Do not attempt to repair, disassemble, or modify the appliance yourself.

• Since a high voltage current enters the product chassis, it may result in electric shock or fire.
• When a repair is needed, contact your nearest service center.

• If any foreign substance such as water has entered the appliance, contact your nearest service center.

• Failing to do so may result in electric shock or fire.

• Do not touch the power cord with wet hands.

• This may result in electric shock.

• Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.

• If a child places a plastic bag over the head, the child can suffocate.

Summary of Contents for NS-RGFESS1-C




















































Reviews: