Insignia NS-LCD26-09, User Manual

Page: 7 / 40

5
Insignia NS-LCD26-09 26" LCDTV
www.insignia-products.com
Using the remote control
To use the remote control:
• Point the remote control towards the remote
sensor on the front of your TV.
Setting up your TV
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.
3 Replace the cover.
Connecting your TV to a power outlet
To connect your TV to a power outlet:
• Plug the power cord into a power outlet.
14 ZOOM Press to select the display aspect
ratio.
15 MTS/SAP Press to select one of the preset
audio modes.
In analog TV mode, you can select
MONO , STEREO , or SAP
(secondary audio program).
In digital TV (DTV) mode, you can
select the audio language, if more
than one language is available.
16 PICTURE Press to select the Brightness and
Contrast setting. You can adjust
the brightness and contrast
without opening the on-screen
menu.
17 SLEEP Press to set the sleep timer. For
more information, see “Setting the
sleep timer” on page 9.
18 COMP Press to select the component
source mode.
19 TV Press to select the ATSC (digital),
or NTSC (analog) TV source.
20 HDMI Press to select the HDMI mode.
21
RECALL
Press to watch the previous
channel.
22
CH
Press to tune to the next higher
channel in the channel list.
23
CH
Press to tune to the next lower
channel in the channel list.
24 FAVORITE Press to toggle the
Favorite/Normal mode. See
“Setting up the channel list” on
page 8 for more information.
25 EXIT Press to close the on-screen
menu.
26 CCD Press to turn closed captions on
and off. For more information, see
“Viewing closed captions” on page
9.
27 FREEZE Press to freeze the video image.
Press again to unfreeze the image.
Do not freeze the video image for
long periods of time. You may
damage the TV screen.
28 AUDIO Press to select the Bass or Treble
setting. You can adjust the bass or
treble without opening the
on-screen menu.
Notes
• Do not expose the remote control to shock or
liquids.
• Do not use the remote control in an area with
high humidity.
• Do not place the remote control in direct
sunlight.
• Do not place objects, such as furniture,
between the remote control and the remote
sensor.
• The remote control may not work if direct
sunlight or bright light shines on the remote
sensor. Either move your TV or change the
angle at which you use the remote control.
# Button Description
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Notes
• Make sure that you use the correct type of
power. See the label on your TV.
• If you do not intend to use your TV for an
extended period of time, unplug the power cord
from the power outlet.