5
Ice Maker
www.insigniaproducts.com
Tools and materials needed
You’ll also need:
•
A freezer shelf to hold the ice storage bin. If your model does not have
one, contact your dealer to order one.
•
Access to a household cold water line with water pressure between 20
and 120 psi.
The water line kit (including copper tubing and shut off valve) are
available in a kit (#5303917950) from your local hardware or plumbing
supply store.
Installing the ice maker
Your Insignia refrigerator comes set up for ice maker installation.
1
Unplug the refrigerator from the wall outlet.
2
Remove the freezer shelf and ice tray rack from the freezer.
Caution
Unplug the refrigerator. To eliminate the danger of electric shock
during installation, you must unplug the refrigerator.
Putty knife
Needle nose pliers
or nut driver
Adjustable wrench
1/4” OD copper supply
line with compression
nuts and ferrules
Knife
Phillips
screwdriver
Flat blade
screwdriver
Shut off valve
(non self piercing)
Water line kit
#5303917950
Electric drill with a
1/4” drill bit
NS-IMK20WH7_16-0335_MAN_V1_ENG.fm Page 5 Tuesday, May 31, 2016 11:59 AM
