Insignia NS-HWD1761 User Manual Download Page 23

23

Espresso Wood Finish TV Stand for TVs up to 65”

www.insigniaproducts.com

ONE-YEAR LIMITED 
WARRANTY

Definitions:

The Distributor* of Insignia branded products warrants to you, 
the original purchaser of this new Insignia-branded product 
(“Product”), that the Product shall be free of defects in the 
original manufacturer of the material or workmanship for a 
period of one (1) year from the date of your purchase of the 
Product (“Warranty Period”).
For this warranty to apply, your Product must be purchased in 
the United States or Canada from a Best Buy branded retail store 
or online at 

www.bestbuy.com or www.bestbuy.ca

,

 

and is 

packaged with this warranty statement.

How long does the coverage last?

The Warranty Period lasts for 1 year (365 days) from the date you 
purchased the Product. Your purchase date is printed on the 
receipt you received with the Product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the 
material or workmanship of the Product is determined to be 
defective by an authorized Insignia repair center or store 
personnel, Insignia will (at its sole option): (1) repair the Product 
with new or rebuilt parts; or (2) replace the Product at no charge 
with new or rebuilt comparable products or parts. Products and 
parts replaced under this warranty become the property of 
Insignia and are not returned to you. If service of Products or 
parts are required after the Warranty Period expires, you must 
pay all labor and parts charges. This warranty lasts as long as you 
own your Insignia Product during the Warranty Period. Warranty 
coverage terminates if you sell or otherwise transfer the Product.

How to obtain warranty service?

If you purchased the Product at a Best Buy retail store location, 
please take your original receipt and the Product to any Best Buy 
store. Make sure that you place the Product in its original 
packaging or packaging that provides the same amount of 
protection as the original packaging. If you purchased the 
Product from a Best Buy online web site (www.bestbuy.com or 
www.bestbuy.ca), mail your original receipt and the Product to 
the address listed on the web site. Make sure that you put the 
Product in its original packaging or packaging that provides the 
same amount of protection as the original packaging.
To obtain warranty service, in the United States call 
1-888-BESTBUY or in Canada call 1-866-BESTBUY. Call agents 
may diagnose and correct the issue over the phone.

Where is the warranty valid?

This warranty is valid only in the United States and Canada at 
Best Buy branded retail stores or websites to the original 
purchaser of the product in the county where the original 
purchase was made.

What does the warranty not cover?

This warranty does not cover:

Customer instruction/education

Installation

Set  up  adjustments

Cosmetic damage

Damage due to weather, lightning, and other acts of God, 
such as power surges

Accidental  damage

Misuse

Abuse

Negligence

Commercial purposes/use, including but not limited to use 
in a place of business or in communal areas of a multiple 
dwelling condominium or apartment complex, or 
otherwise used in a place of other than a private home.

Modification of any part of the Product, including the 
antenna

Display panel damaged by static (non-moving) images 
applied for lengthy periods (burn-in).

Damage due to incorrect operation or maintenance

Connection to an incorrect voltage or power supply

Attempted repair by any person not authorized by Insignia 
to service the Product

Products sold “as is” or “with all faults”

Consumables, including but not limited to batteries (i.e. AA, 
AAA, C etc.)

Products where the factory applied serial number has been 
altered or removed

Loss or Theft of this product or any part of the product

Display panels containing up to three (3) pixel failures (dots 
that are dark or incorrectly illuminated) grouped in an area 
smaller than one tenth (1/10) of the display size or up to 
five (5) pixel failures throughout the display. (Pixel based 
displays may contain a limited number of pixels that may 
not function normally.)

Failures or Damage caused by any contact including but 
not limited to liquids, gels or pastes.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS 
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA 
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR 
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS 
OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT 
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, 
LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES 
NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE 
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE 
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN 
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND 
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY 
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND 
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN 
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT 
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY 
FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
©2016 Best Buy. All rights reserved.
Made in China

Summary of Contents for NS-HWD1761














































Reviews: