www.insigniaproducts.com
31
Console for TVs up to 80”
STEP 24: Insert the drawer
• Extend the ball bearing slide tracks on the partition panels (
E
and
F
) all the way forward (including ball bearing cart),
then align the slide runners on the assembled drawer with the slide tracks and push the drawer carefully inside until it
stops.
Tip:
If the drawer does not go in smoothly, take it out and repeat the step. If you need to remove the drawer, pull the
drawer all the way out, then simultaneously push the plastic release lever on the ball bearing slides up on one side
and down on the other side, and then pull it completely out.
Ball bearing cart
Front
Front
