background image

3

3-Drawer File Cabinet - Black

www.insigniaproducts.com

Safety information

WARNINGS

Units must be assembled with the instructions, parts, and hardware provided. Improper assembly or use could 
cause structural failure, instability, tip over, and/or serious injury.

Do not move the unit when loaded. Doing so could cause instability, product collapse, and/or serious injury.

This product is intended to hold the maximum weight indicated: 

Top

: Up to 80 lbs. (36.3 kg)

Large Drawer

: Up to 50 lbs. (22.7 kg)

Small Drawer

: Up to 30 lbs. (13.6 kg)

This product is designed and intended for use with computer, fax, and printer equipment only. Improper loading 
with a television or other heavy equipment could cause instability, and/or serious injury.

Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:

Verify that the furniture is stable on its own.

Place heaviest items in the lower (large) drawer.

Never allow children to climb or hang on drawers, doors, or shelves.

Never open more than one drawer at a time.

Remove items that might tempt children to climb, such as toys and remote controls, from the top of the furniture.

File cabinets may tip over causing serious injury if not assembled, installed, or used properly.

Always load the BOTTOM drawer first, then the top.

Do not exceed the maximum load limit for each drawer as stated in this manual.

Distribute files evenly front-to-back in each drawer.

Before moving the cabinet, empty the contents of each drawer, starting with the TOP drawer first. 

Summary of Contents for NS-FCBK3

































Reviews: