P
ANEL
User Guide
CD/DVD Shelf System with iPod Dock
| NS-ES6111
INTRODUCTION
Congratulations on your purchase of a high-quality Insignia product. Your NS-ES6111
represents the state of the art in shelf system design and is designed for reliable and
trouble-free performance.
SAFETY INFORMATION
Electric shock warning
Warning
: To reduce the risk of electric shock, do not remove the cover or back. There
are no user-serviceable parts inside. Refer servicing to qualified service personnel.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within your shelf system’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons. The exclamation
point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in
the literature accompanying your shelf system.
CAUTION
: To prevent fire or electric shock hazard, do not expose this
shelf system to rain or moisture.
WARNING
: Your shelf system should not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, should be placed on your shelf
system.
Ventilation
CAUTION:
Do not block any ventilation openings. Install in accordance with these
instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of your shelf system and to protect it from over-heating.
The openings should never be blocked by placing your shelf system on a bed, sofa,
rug, or other similar surface. This shelf system should not be placed in a built-in
installation such as a bookcase or rack unless correct ventilation is provided or these
instructions have been adhered to.
Laser warning
WARNING:
This shelf system uses a laser system.
To ensure correct use of this shelf system, read this user guide carefully and retain
it for future reference. Should your shelf system require maintenance, contact an
authorized service center.
Changing controls, making adjustments, or carrying out procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure.
There is visible laser radiation when open.
Do not stare into the beam.
Laser Type: Dual semiconductor laser GaAIAs
Wavelength: 650nm and 780nm
Output Power: 7mW
Beam Divergence: 60 degree
CAUTION:
Visible and invisible laser radiation is present when your shelf system is
open and interlocks are defeated.
Power Cord
CAUTION:
It is recommend that most appliances be placed on a dedicated circuit—
a single outlet circuit powering that appliance only and has no additional outlets
or branch circuits. Check the specification section of this guide for power
requirements.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result in electric shock or fire.
Periodically examine your shelf system cord, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of your shelf system, and have
the cord replaced with an exact replacement part by an authorized service provider.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits your shelf system.
To disconnect power from the outlet, pull out the plug. When installing your Shelf
system, make sure that the plug is easily accessible.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
Read and observe all warnings and instructions in this user guide and
those marked on your shelf system. Retain this guide for future reference.
This shelf system has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards incorporated
in this shelf system will protect you if you observe the following procedures for
installation, use, and servicing. This shelf system does not contain any parts that
can be repaired by you.
Do not remove the cabinet cover or you may be exposed to dangerous voltage. Refer
servicing to qualified service personnel only.
• Read all safety and operating instructions before operating your shelf system.
• Keep safety, operation, and use instructions for future reference.
• Heed all warnings on your shelf system and in the operating instructions.
• All operation and use instructions should be followed.
• Do not use this shelf system near water. For example, do not use this Shelf
system near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement,
near a swimming pool, and other areas located near water.
• Clean only with dry cloth. Unplug this shelf system from the wall outlet before
cleaning. Do not use liquid cleaners.
• Do not block any ventilation openings. Install in accordance with these instructions.
Slots and openings in the cabinet are provided for ventilation to ensure reliable
operation of your shelf system, and to protect it from over-heating.
• Do not block any ventilation openings. Do not place the shelf system on a bed,
sofa, rug or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless correct ventilation is
provided or these instructions have been adhered to.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other electronic devices (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from your shelf system.
• Use only attachments or accessories specified by Insignia.
• Use only with the cart, stand, tripod, bracket, or table specified
by Insignia, or sold with this shelf system. Use caution when
moving the cart/shelf system combination to avoid injury from
tip-over.
• Unplug this shelf system during lightning storms or when unused
for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when your
shelf system has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into your shelf system,
your shelf system has been exposed to rain or moisture, does not operate
normally, or has been dropped.
IMPORTANT!
Connect the AC cord only after the speakers, antenna, and all optional
equipment have been connected.
Never make or change any connections with the power switched on.
The rating plate is located at the rear panel of the system.
1. Power
Cord
Plug into an electrical outlet.
2. Component video and progressive outputs
Connect a television that has component video input. Use a component video cable.
This type of connection provides the best picture quality.
3. FM antenna input connections
FM reception - Connect the FM antenna to the FM jack. Move the antenna in
various directions until the clearest signal is received.
AM loop antenna connections
AM reception - Connect the AM loop antenna to the AM jack. Position the loop
antenna to receive the clearest sound.
Fully insert the stripped portion of the antenna into the terminal as shown above.
Note: Position the antenna as far away as possible from a TV, VCR, or other
radiation
source.
4. Front
speaker
Connect the left front speaker to the L terminals and right front speaker to the
R terminals. Connect the colored wire to the color terminal and black wire to the
black
terminal.
5. Video Output - REC
For connecting VCR or other recording device (Most DVDs cannot be recorded).
Audio Outputs - REC
For connecting audio (Left/Right) signal to external recording devices such as VCR
or Tape Recorder.
6. Coaxial
output
Connect an external device that has a digital audio input jack.
P
ACKING
Examine the contents of the box of the DVD Shelf System:
•
DVD Shelf System
•
Remote Control with 2 batteries
• This
Instruction
Manual
• AV
Cable
•
AM and FM Antenna
• 2
Front
Speakers
• 2
Speaker
wire
• iPod universal dock adapters (9,10,11,12,13,14,16,17)
• When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
• Upon completion of any service or repairs to this shelf system,
ask the service technician to perform safety checks to determine
that your shelf system is in proper operation condition.
• USA and Canada versions comply with ETL requirements.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Consumers should note that not all high definition television sets are fully compatible
with this product and may cause artifacts to be displayed in the picture. In case of
525 or 625 progressive scan picture problems, we recommend that the user switch
the connection to the “standard definition” output. If there are questions regarding our
TV set compatibility with this model 525p and 625p DVD player, contact our customer
service center.
U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132
F
RONT
P
ANEL
R
EAR
P
ANEL
1.
Standby indicator
Power on/off Mode - No Light; Standby Mode - Red LED.
2.
Infrared receiver
Receives the signal from the remote control.
3.
LCD Display Area
Displays status messages.
4.
Disc Tray
Place a DVD or CD, label side up, into this tray.
5.
iPod dock
Insert your iPod player into this jack.
6.
VOLUME
Adjusts the volume. Turn clockwise to increase the volume and
counter-clockwise to decrease the volume.
7.
STANDBY/ON
Press to turn your shelf system on or to standby mode.
8.
Phones
Plug standard headphones into this jack.
9.
AUX IN
Plug external device with Audio output into this jack to play its sound
through this player.
10.
CHANNEL
1) Disc/USB mode - a. Skips to previous chapter or track,
b. Press and hold to fast backward. 2) Radio mode - Tune to previous radio
channel memory. 3) Standby mode - When adjusting clock setting, press to
decrease
an
hour/minute.
11.
CHANNEL
1) Disc/USB mode - a. Skips to next chapter or track, b. Press
and hold to fast forward 2) Radio mode - Tune to next radio channel memory.
3) Standby mode - When adjusting the clock setting, press to increase an hour/
minute.
12.
Source/Clock
Cyclically switching between Disc/USB, FM, AM, AUX and iPod
mode. 2) Standby mode - Press and hold to start setting up the real time clock.
13.
Play
Disc/USB mode - Play/Select tracks or songs.
14.
STOP/OPEN
Disc/USB mode - a. Stop playback b. Eject disc in Disc mode.
15.
USB jack
Plug external USB device into this jack.
1. DISPLAY Function
While the disc is playing, press
INFO
to display playback information present on
the
disc.
For DVD :
• Press
INFO
once to display the playback information and playing time of current
chapter
as
below:
• Press
INFO
twice to further display more playback information as following:
• Press
INFO
three times to check the remaining time of current chapter.
• Press
INFO
four times to check the playing time of current title.
• Press
INFO
five times to check the remaining time of current title.
For CD:
• Press
INFO
once to display the playback information and playing time of current
track.
• Press
INFO
twice to check the remaining time of current track.
• Press
INFO
three times to check the playing time of current disc.
• Press
INFO
four times to check the remaining time of current disc.
1.1 TT (Title Info)
• Displays the title number being played and the total number of titles recorded on
the
disc.
1.2 CH (Chapter Info)
• Displays the chapter number being played and the total number of chapters
recorded on the disc.
1.3 Elapsed time
• Displays the elapsed time from the beginning of the title/chapter/disc/track being
played.
1.4 Audio
• Displays the audio track currently selected.
1.5 Language (Subtitle)
• Displays the subtitle language currently selected.
1.6 Angle
• Displays the viewing angle currently selected. When a disc without multi-angle is
played, OFF is displayed.
1.7 TRK (Track Info)
• Displays the Track Number being played and the Total Number of Tracks recorded
on the disc.
1.8 Repeat Mode
• Displays any repeat mode set.
Note
: After checking the settings, press
INFO
again to turn off the display.
2. GOTO Function
This function allows you to directly select any instant of the disc to start playback.
2.1 Select a Specific Title / Chapter / Track
You can select any specific Title / Chapter / Track to start playback by directly
selecting the Title / Chapter / Track number.
• Press
GOTO
.
•
Press ◄ or ► to highlight a Title / Chapter / Track and press the corresponding
numeric
key
0 - 9
.
• Press
OK
to confirm. The unit starts playback from the position you select.
Note
: Press
ZOOM/CLEAR
to reset the Title / Chapter / Track when it is highlighted.
2.2 Locating a Specific Time
You can select any specific location by directly entering the time (hours, minutes,
seconds).
• Press
GOTO
.
•
Press ◄ or ► to highlight time.
•
Directly key in the numeric key
0 - 9
for the time to start playback.
- The first two digits are the hours.
- The next two digits are the minutes.
- The last two digits are the seconds.
•
After entering the time, press
OK
to confirm. The unit starts playback from time
you
select.
Note
:
•
Some discs may not allow you to use this function.
•
Some scenes may not be located as precise as you specified.
•
This method for accessing a specific location is available only within the current title
of the DVD disc.
• Press
ZOOM/CLEAR
to reset the time when the time is highlighted.
3. Programming Playback
• Press
the
PLAYMODE
button.
•
When MODE is highlighted, use ◄ or ► to select the option for PROG mode. Then
press OK to confirm.
3.1 DVD Programming
•
Enter the title numbers in . Use ◄ or ► to move the highlight to chapter and
enter the chapter numbers in .
•
Use ▲, ▼,◄,and ► to move to another field.
•
Repeat the above steps for more inputs.
•
Press or highlight PLAY on the screen and press
OK
to start the programmed
playback.
Selection Menu
The Selection Menu appears when starting MP3/ WMA/JPEG playback.
All folders appear in the left-side menu and numbered in ascending order.
When one of the folders is highlighted, all the contents of the folder are displayed on
the right side.
Music/Picture files can be selected individually for desired playback. Use the active
navigation keys to highlight Music/Picture at the bottom of Selection Menu and press
OK
to confirm.
Then select the files and press
OK
or to start playback.
[MUSIC] - MP3 / WMA Files
The unit will begin playing all of the MP3 / WMA files currently selected. It then plays
play all the files in the subfolders contained within the same folder. After that, the
unit plays the remaining folders on the disc.
To Program MP3 song follow these steps:
1. Press
PLAYMODE
button on the remote control, the Play Mode Menu displays on
the
screen.
2. When MODE is highlighted, use ◄ or ► to select PROG mode. Then press
OK
to
enter MP3 program menu. In this menu, the letter F means Folder, T means Track.
3. Input the Folder number below F and track number below T with two digital number.
4. Use the Navigation keys to move to another field and repeat step 3 for the next song.
5. Press or highlight PLAY on the screen and press OK to start program playback.
Highlight CLEAR on the PROG screen and press OK to delete all inputs. You can
program up to 16 songs in total.
[PICTURE] - JPEG Files
When you press the
OK
key to select the JPEG file, .the unit only displays the
current file you selected. Press
PLAY
key to start the slide show for the JPEG file
currently selected. It proceeds to display all other JPEG files in the same folder.
Later the unit plays the JPEG files in the subfolders contained in the same
folders. After that, the unit plays the surplus folders on the disc.
Important: make sure the FM and AM antennas are connected correctly.
You can program up to 20 FM and 20 AM radio channels maximum for easy recall.
To search a radio station
1. Press the
STANDBY/ON
button on the remote control to turn on the unit.
2. Press repeatedly either the SOURCE on the front panel or remote control until the
Radio mode is selected. Press again to switch between AM and FM bands if
necessary.
3. Tune to the radio station by one of the following methods :
• Manual Tuning - Press ▲ / ▼ repeatedly on the remote control until the desired
frequency appears on the display.
• Automatic Tuning - Press on the remote control to start
AUTO SCAN
. It
will stop on any radio station found. Repeat this process until it stops on the desired
station.
To save a radio station
1. When the desired radio station is tuned. Press
OK
to start save, the Memory
number will start blinking.
2. Press ◄/► on the remote control to select the memory number that you want the
unit to memorize.
3. Press
OK
again to store into the selected memory number, the memory number
display stops blinking to confirm memory saved.
4. Repeat the above steps to save up to 20 FM and 20 AM radio channels.
Note
: When you tune at a weak FM station manually, press
AUDIO / FM ST
on the
remote control to switch from Stereo mode to Mono mode to reduce the
background
noise.
To recall a memorized radio channel
1. Press the
STANDBY/ON
button on the remote control to turn on the unit.
2. Press repeatedly either the
SOURCE
on the front panel or remote control until the
Radio mode is selected. Press again to switch between AM and FM bands if
necessary.
3. Press ◄/► on the remote control or on the front panel to change to a
different memorized radio channel.
4. Press 0 - 9 numeral keys to directly recall the memories.
Note
: The memorized radio channels are erased after the unit is unplugged.
A
F
UNCTION
DVD
7/36
1/41
00:03:12
TT
CH
Disc format
Title
Current title
Total title
Chapter
Current chapter
Total chapter
Elapsed time
DVD
1/41
00:03:12
TT
CH
Current title
chapter
time
7
/36
Track
time
CD
00:03:12
TRK 2
/2
PLAY MODE
MODE
OFF
REPEAT
OFF
PLAY MODE
MODE
PROG
REPEAT
OFF
PLAY MODE
MODE
PROG
REPEAT
OFF
PLAY MODE
MODE
PROG
REPEAT
OFF
Title
Chapter
- -
- -
Disc format
Track
Current track
Total track
Elapsed time
Repeat Mode
CD
00:03:12
TRK
2 /2
A
DVANCED
P
LAYBACK
F
UNCTION
P
LAYING
MP3 / WMA / JPEG
L
ISTENING TO THE RADIO CHANNEL
3.2 CD Programming
•
Enter the track numbers in .
•
Use ▲, ▼,◄, and ► button to move to another field.
•
Repeat the above steps for more inputs.
•
Press or highlight PLAY on the screen and press
OK
to start the programmed
playback.
•
Highlight the current input on the screen and press
ZOOM/CLEAR
to delete the
track
you
input.
Note
:
• Highlight CLEAR on the PROG screen and press
OK
to delete all inputs.
4. Random Playback
The chapter in DVD and track in CD can be played in random order.
• Press
the
PLAYMODE
button.
•
When MODE is highlighted, use ◄ or ►to select RANDOM mode. Then press
OK
to
confirm.
5. Repeat Playback
You can play a specific title, chapter, or track repeatedly. Press the
PLAYMODE
button to access the play mode menu.
5.1 Repeating a Title / Chapter / Track / Whole disc
• Press
the
PLAYMODE
button, use ▲ or ▼ to select the REPEAT option.
•
Use ◄ or ► button to select different repeat mode and press
OK
to confirm. The
selected mode will be highlighted on the screen.
For DVD Disc:
Off > Chapter > Title
For CD:
Off > REP 1 > REP ALL
For MP3 / JPEG / WMA Disc:
Off > REP DIR > REP 1 > REP ALL
5.2 Repeating a Specific Section
•
While the disc is playing, press
A-B
to set the beginning of the section you want to
play
repeatedly.
• Press
A-B
again to set the end of the section you want to play repeatedly.
•
The unit immediately begins replaying your section repeatedly.
• Press
A-B
again to clear the programmed repeat playback and return to the
normal
playback.
Note
:
•
The A-B repeat function can only be used within the same title. If the start and end
of the section to be repeated are in different titles, it will not work.
•
The A-B repeat function does not operate in scenes where different camera angles
are
recorded.
6. BOOKMARK Function
The Bookmark feature allows you to mark a point that you want to watch again.
6.1 Creating a Bookmark
•
During DVD / CD playback, press
BOOKMARK
to access the bookmark menu.
•
Use ◄ or ► button to navigate and press
OK
to bookmark your desired point.
6.2 Recalling a Bookmark Scene
•
During playback, press
BOOKMARK
to access the bookmark menu.
•
Use ◄ or ► button to highlight the bookmark you want and press to play from
the
Bookmark
point.
Press
CLEAR
to reset the highlighted bookmark.
7. EQ (Selecting Different EQ Modes) and EX BASS Control
7.1 EQ Modes
There are a total of 5 EQ modes available. Press
EQ
repeatedly on the remote
control for different EQ modes : FLAT, ROCK, POP, CLASSIC, and JAZZ.
7.2 EX Bass Control
Press EXBASS to switch the EXBASS sound effect on or off.
8. SLEEP function
This feature lets you select a time for your shelf system to switch to the Standby
mode automatically.
8.1 Setting the sleep timer
Press SLEEP on the remote control repeatedly to cycle through the following sleep
timer options.
•
SLEEP: 90 MINUTES
•
SLEEP: 80 MINUTES
•
SLEEP: 70 MINUTES
•
SLEEP: 60 MINUTES
•
SLEEP: 50 MINUTES
•
SLEEP: 40 MINUTES
•
SLEEP: 30 MINUTES
•
SLEEP: 20 MINUTES
•
SLEEP: 10 MINUTES
•
SLEEP OFF
8.2 Checking the remaining sleep time
When the Sleep timer is switched on, you can check the remaining time before your
shelf system switches to Standby mode. Press SLEEP once and the remaining
time is displayed.
8.3 Cancelling the sleep timer
To switch off the Sleep Timer, press SLEEP repeatedly until
SLEEP
icon is turn off.
PLAY MODE
MODE
OFF
REPEAT
OFF
PLAY MODE
MODE
PROG
REPEAT
OFF
PLAY MODE
MODE
PROG
REPEAT
OFF
PLAY MODE
MODE
RANDOM
REPEAT
OFF
PLAY MODE
MODE
PROG
REPEAT
OFF
PLAY MODE
MODE
PROG
REPEAT
OFF
PLAY MODE
MODE
PROG
REPEAT
OFF
REPEAT A-
REPEAT A-B
A-B CANCEL
MARK - - - - - - - - - - - -
T 1
C 1 00 : 03 :21
RADIO
FM
ROCK
EXBASS
MHz
RADIO
AM
ROCK
EXBASS
MHz
MEMORY
RADIO
FM
ROCK
EXBASS
MHz
MEMORY
Music
Picture
01 . BITRATE
02 . FOLDER TEST
03 . FOLDER 1
04 . ADD CHARAK
05 . ALPHANUYER
06 . NUMERIC
07 . FOLDER 2
08 . FOLDER 3
09 . FOLDER 4
10 . FOLDER 5
01 . BITRATE_03
02 .
03 .
04 .
05 .
06 .
07 .
BITRATE_04
BITRATE_05
BITRATE_06
BITRATE_07
BITRATE_08
BITRATE_09
08 . BITRATE_10
09 . BITRATE_11
10 . BITRATE_12
- -
Audio
Subtitle
1/4
5.1CH
OFF
ENG
1/2ENG
---
Angle
NOTE:
You can only see these screens if the unit is connected to a TV
1 (Open / Close)
• Press to open the disc tray.
Note
: Load the disc on the disc
tray with disc label facing upward.
• Press again to close the disc
tray. It will start playback
automatically.
2 (Play)
• Press to start playback.
3 (Pause)
• Press to pause playback.
• Press again or press to
resume
normal
playback.
4
• Press to skip a track or picture
backward
or
forward.
5 (Stop)
• Press to stop playback.
• Press to display the selection
menu during playback (for
JPEG/MPEG
4
file
only).
6 ROTATE (for
• During playback of JPEG file,
JPEG file only)
press
ROTATE
to rotate the
picture.
7 ZOOM / CLEAR
ZOOM
• Press to zoom in a picture
during JPEG file slideshow
playback.
CLEAR
• Press to delete the information
you
input.
8 Active Navigation
• Press to select a file and press
OK
to start playback.
1. (Open / Close)
• Press to open the disc tray.
Note
: Load the disc on the disc tray with disc label facing upward.
• Press again to close the disc tray. The shelf system starts playback
automatically.
2. Play
• Press to start playback.
3. MENU
• Press to display the Disc Menu.
Note
: Playback stops to display the menu. The button does not work for CD playback.
4. (search backward or forward, slow motion)
• Press to search backward or forward. Press to resume playback. Each
time or is pressed, the speed of backward or forward search changes
accordingly.
• In Pause mode, press to start forward or backward slow motion play. Each
time or is pressed, the speed of slow-motion playback changes
accordingly. Press to resume normal playback.
Note
: Slow motion step-by-step does not work with CD Playback.
5. (Skip to the beginning of a chapter or track)
When a disc is playing, you can skip backward or forward a chapter or track.
• Press to skip to the beginning of the previous chapter or track.
• Press to skip to the beginning of the next chapter or track.
Note
: For audio CD discs, use the numeric buttons (
0 - 9
) to directly jump to a
track
number.
6. Stop
• Press once to stop the current playback instantly and enter the Resume Play
mode.
Press to resume playback from the point at which you last stopped the disc.
• Press twice to stop playback completely. You cannot resume playback.
Press to start playback from the beginning of the disc.
7. Pause
You can freeze the image and advance frame-by-frame.
•
CD
: Press to pause the playback. Press again or press to resume the
normal
playback.
•
DVD
: Press to pause the playback. Press again to go to STEP mode. Each
time you press , the video advances one frame. Press to resume playback.
8. TITLE
• Press to display the Title Menu if present on the disc. This feature works for DVD
playback
only.
9. ZOOM (To Zoom In the Image)
You can magnify pictures during playback.
• When a disc is playing, press the
ZOOM / CLEAR
button. Each time the
ZOOM /
CLEAR
button is pressed, the ZOOM settings are changed as follows:
ZOOM x 2 ----> ZOOM x 3 ----> ZOOM x 4 ----> ZOOM x 3/4 ----> ZOOM x 2/3
----> ZOOM x 1/2 ----> ZOOM : OFF
• While an image is magnified, you can use ▲, ▼,◄, and ► keys to shift image for
viewing.
• To return to the original normal view, press the
ZOOM
key until the
ZOOM : OFF
symbol shows. The screen returns to normal.
• When you reach the edge of the image, the display will not shift anymore in that
direction.
10. ANGLE
You can select different angles of viewing when playing a DVD video disc that
contains scenes recorded from multiple angles.
• Press
ANGLE
repeatedly to select different angles of viewing, if available, on the
disc.
Note
: This function is only available when the scenes shot from multiple angles have
been recorded on the DVD. If multi-angle viewing is not available, OFF is
displayed.
11. AUDIO / FM ST
Press to change to a different audio language on the disc during playback. You
can change audio language or audio output.
• When a disc is playing, press
AUDIO / FM ST
to show the current playback audio
track
number.
• Press repeatedly to select the desired audio track.
Note
: If there is only one audio track available on the disc, the number does not
change.
12. SUBTITLE
During playback, you can change to a different subtitle language or disable subtitles.
• When a DVD disc is playing, press
SUBTITLE
to show the current playback
language
subtitle.
• Press repeatedly to select the desired subtitle language.
Note
: This function can only be used for disc on which different subtitle languages
have been recorded. The number of languages recorded may be different
depending on the disc.
:
[ 1
2CH ]
:
[ 3 ENGLISH ]
P
LAYING
DVD/CD D
ISC
