5
Bluetooth Stereo Turntable
www.insigniaproducts.com
1
Make sure that the belt is not twisted, then use your thumb to stretch the belt
until it reaches the round hole in the platter.
2
Still holding the belt, flip the platter over, then insert the platter onto the
spindle in the center of your turntable.
3
Align the round hole in the platter with the pulley and use your finger to hook
the belt onto the pulley.
4
Place the turntable mat on the platter.
Note:
Make sure that you place the belt on the
metal
track and not on the
section with teeth.
Note:
When you want to take out the platter from the turntable
, remove the
mat first, then grasp the platter and pull it upward.
This is especially important if
you are shipping your turntable to prevent the platter from shaking.
Round hole
Belt
Pulley
Belt
