12
www.insigniaproducts.com
Setting the temperature
• Press the temperature up
or down
buttons to increase or decrease the
temperature by one degree. The temperature range is 34°–50° F (1°–10° C).
• Press and hold the temperature up
and down
buttons at the same time
for three seconds to switch between Fahrenheit and Celsius.
Memory function
If you experience a power outage, when your cooler is turned on again it resumes
the same temperature that was set when the power went off.
Using the display
• When you plug in your cooler for the first time, the display screen turns on for
three seconds and you hear a start-up tone.
• In normal mode, the display shows the set temperature.
Lighting your cooler
• Press the light button
to turn the interior light on and off.
Using the adjustable shelves
• All of the shelves have tabs to engage the cabinet on both sides.
• Any of the shelves can be removed to accommodate larger beverages.
To remove a shelf:
1
Remove all beverages from the shelves.
2
Lift the shelf upward and then gently pull out the shelf.
To replace a shelf:
• Place the sides of the shelf back onto the supporting guides in the cabinet and
push back until the shelf tabs slide into place.
Arranging your beverages
In order to maintain good air circulation in your cooler, do not let the beverages
touch the back of your cooler.
Notes:
• A large number of beverages lowers the cooling efficiency of your cooler.
• When you put several beverages in your cooler at one time, the temperature in
your cooler may rise temporarily.
• Adjust the thermostat setting by one increment at a time. Allow several hours for
the temperature to stabilize between adjustments.
• The screen display always shows the set temperature. When adjusting the
temperature, the temperature display blinks to indicate that the temperature is
being adjusted.
CAUTION:
Make sure that the tabs are firmly engaged in the supporting guides
before storing any beverages.
