Insignia NS-42PDP, User Manual

Page: 15 / 88

15
Insignia NS-42PDP 42” Plasma TV
www.insignia-products.com
Automatically setting up channels
To automatically set up the channel list:
1
Press the MENU button.
2 Press the or button one or more times
to highlight Setup , then press the OK or
button to open the Setup menu.
3 Press the or button one or more times
to highlight Auto Ch Search .
4 Press the OK or button to start the search.
Manually adding or deleting channels from the
channel list
After you create a channel list using the Auto Ch
Search option, you can manually add or delete
channels from the channel list.
To add or delete channels:
1
Press the MENU button.
2 Press the or button one or more times
to highlight Setup , then press the OK or
button to open the Setup menu.
3 Press the or button one or more times
to highlight Manual Ch Set .
4 Press the OK or button to access the
Manual Ch Set options.
5 Press the or button to select a channel,
then press the OK button to add or delete a
channel. If a channel is in the channel list, it
will have a mark beside it.
6 Press the EXIT button to close the menu.
Changing channels
To change channels:
• Press the CH or button on the front of
your TV or the CH – or + button on the
remote control to go to the next lower or
higher channel.
Or
Press the number buttons to select a
channel. For example, if you want channel
83, press
8 , then press 3 .
Or
Press the button to go to the last viewed
channel.
Selecting a digital sub-channel
Most digital TV channels have more than one
channel. The main channel carries the signal for
the main TV program. The sub-channels carry
signals for additional or alternate programming,
such as a radio or news broadcast.
For example, if the main channel number is 8,
the sub-channel might be 8-1, 8-2, and 8-3.
To select a sub-channel:
1
Press the number buttons for the main
channel, for example 8.
2 Press the – button, the press the sub-channel
button, for example 1.
Adjusting the volume
To adjust the volume:
• Press VOL or button on the front of your
TV or the VOL – or + button on the remote
control to decrease or increase the volume.
• Press the MUTE button to turn off the sound.
Press the MUTE button again to turn the
sound back on.
Displaying status information
To display status information:
• Press the INFO button. Your TV displays
status information, such as the channel
number or signal source.
Note
You can press the Exit button to stop the search.