48
Insignia 32" 1080p 60Hz LED TV
www.insigniaproducts.com
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
1
Press
MENU
.
2
Press
W
or
X
to highlight
CHANNELS
, then press
T
or
ENTER
.
3
Press
S
or
T
to highlight
Audio Only
, then press
ENTER
or
X
.
4
Press
S
or
T
to select
On
.
5
Press
MENU
,
ENTER
, or
W
to return to the previous
menu, or press
EXIT
to close the menu.
Changing channel settings
This section covers:
• Automatically scanning for channels
• Hiding channels
• Setting up a favorite channel list
• Viewing a favorite channel
• Adding or changing a channel label
• Checking the digital signal strength
Automatically scanning for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH
or
CH
, your TV goes to the next or previous
channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
1
Press
MENU
.
2
Press
W
or
X
to highlight
CHANNELS
, then press
T
or
ENTER
.
3
Press
S
or
T
to highlight
Auto Channel Search
,
then press
ENTER
or
X
.
4
Press
S
or
T
to highlight
Cable / Satellite Box
,
Cable from the wall
, or
Antenna
, then press
ENTER
.
Notes
• The picture turns off in about five
seconds.
•
Audio Only
works only when the
input source is TV, and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the
Audio Only
option is
automatically reset to
Off
.
