Insignia NS-28DD310NA15 User Manual Download Page 13

Page: 13 / 86

Insignia 28" LED TV/DVD Combo

www.insigniaproducts.com

TV components

Package contents

• 28" LED TV with built-in DVD player
• Remote control and batteries (2 AAA)
• Stand column and screws (3)
• TV stand and screws (4)

• Quick Setup Guide
• Important Information

Front

Note

The control buttons are on the bottom edge
of the TV screen.

Item

Description

Remote control
sensor and power
indicator

The remote control sensor
receives signals from the remote
control. Do not block.
The power indicator:

• Turns off when your TV is

on.

• Lights red when your TV is

off (standby mode).

(play/pause)

Press to start or pause DVD
playback.

EJECT

Press to eject a DVD.

Press to open the on-screen
menu. For more information, see
“

Navigating the menus

” on

page

INPUT

Press this button, then press

to select the video input

source your want. Wait a few
seconds. Your TV switches to the
source you selected. For more
information, see “

Selecting the

video input source

” on page

In menu mode, press to confirm
selections.

VOL–/VOL+

Press to decrease or increase the
volume.

/CH

Press to go to the previous or next
channel in the channel list. For
more information, see “

Selecting

a channel

” on page

POWER

Press to turn your TV on or off
(standby mode).

Warning:

When your TV is off,

power still flows through it. To
completely disconnect power,
unplug the power cord.

Summary of Contents for NS-28DD310NA15























































































Search results

Summary of Contents for NS-28DD310NA15

Reviews:

Related manuals for NS-28DD310NA15

Brands by name

Popular brands

Insignia NS-28DD310NA15, User Manual

Search results

Summary of Contents for NS-28DD310NA15

Reviews:

Related manuals for NS-28DD310NA15

Brands by name

Popular brands