Insignia NS-20WLCD, User Manual

Page: 11 / 68

11
Insignia NS-20WLCD 20” LCD TV
www.insignia-products.com
5 Press the CH+ or CH– one or more times to
select Channel Skip .
6 Press the ENTER , VOL+ , or VOL– button to
select On or Off .
If you select On , the channel is erased from
the list.
If you select Off , the channel is added to the
list.
When you erase a channel, you cannot tune
to the channel with the
CH+ or CH– buttons.
You can tune to the channel by pressing the
numbers buttons for the channel.
Fine tuning the TV signal
Automatically fine-tuning
To automatically fine-tune the TV signal:
1
Press the MENU button to open the
on-screen display (OSD).
2 Press the CH+ or CH– button to select
Channel .
3 Press the ENTER , VOL+ , or VOL– button to
open the Channel menu.
4 Press the CH+ or CH– button one or more
times to select AFC .
5 Press the ENTER , VOL+ , or VOL– button to
turn the AFC option on or off. When the AFC
option is turned on, your TV automatically
fine-tunes for the best picture and sound.
Manually fine-tuning
To manually fine-tune the TV signal:
1
Press the MENU button to open the
on-screen display (OSD).
2 Press the CH+ or CH– button to select
Channel .
3 Press the ENTER , VOL+ , or VOL– button to
open the Channel menu.
4 Press the CH+ or CH– button one or more
times to select Fine Tune .
5 Press the VOL+ or VOL– button one or more
times to adjust the picture and sound.
Changing channels
To change the channels:
• Press the CH+ or CH– button one or more
times to select the channel you want.
• To select a one-digit channel number,
press the number button for the channel,
then press the
ENTER button or wait a
few seconds.
• To select a two-digit channel number,
press the two number buttons in
sequence, then press the
ENTER button
or wait a few seconds.
• To select a three-digit channel number,
press the three number buttons in
sequence.
Adjusting the volume
To adjust the volume:
• Press the VOL+ or VOL– button to
increase or decrease the volume.
• Press the MUTE button to mute sound.
Press the button again to restore sound.
Selecting a menu language
To select a menu language:
1
Press the MENU button to open the OSD.
2 Press the CH+ or CH– button one or more
times to select Display .
Note
If you manually fine-tune a program, the AFC option turns off.
Note
To watch a channel that has been erased from the channel list,
you must use the number buttons to tune the channel.