14
20" 720p 60Hz LED DVD Combo TV
www.insigniaproducts.com
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
on page
You can connect your cable or satellite box using:
• HDMI (best)
• Component video (better)
• AV (composite video) (good)
• Coaxial (good)
HDMI (best)
1
Make sure that your TV’s power adapter is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect an HDMI cable (not provided) to one of the
HDMI
jacks on the side or back of your TV and to the
HDMI
OUT
jack on the cable or satellite box.
4
Plug your TV’s power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press
S
or
T
to highlight
HDMI 1
or
HDMI 2
, then press
OK
.
Note
• An HDMI cable carries both audio and video. You do not need to use any
audio cables.
• You can also press
HDMI
to select the cable or satellite box.
HDMI cable
Cable or
satellite box
Side of TV
HDMI cable
connector
HDMI jack
On your TV
Cable wall
jack
