Insignia NS-19E430A10, User Manual

Page: 14 / 44

10
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV
www.insigniaproducts.com
Making connections
Connecting the power cord
To connect the power cord:
1 Slide the AC power adapter holder into the
holder mounting hole on the back of the TV.
2 Place the AC power adapter into the holder.
3 Insert the power cord into the AC adapter, then
insert the AC power adapter into the
DC IN 12V
jack on the back of your TV.
4 Plug the power cord into a power outlet.
Connecting an antenna, cable TV, or
satellite TV
To connect an antenna, cable TV, or satellite TV:
1 Make sure that your TV is turned off and the
power cord is disconnected.
2 Connect one end of a coaxial cable to the
ANT/CABLE IN jack on the back of your TV, then
connect the other end to the antenna, cable TV,
or satellite TV jack.
3 Turn on your TV.
4 Press INPUT on the remote control or the side of
your TV to display the input source menu, then
press
INPUT repeatedly or press or to select
TV . Press OK/ENTER .
Warning
• If you wall mount your TV, make sure that you
use the AC power adapter holder.
• If you place your TV on a flat surface, such as a
table, you do not have to use the AC power
adapter holder.
• When your TV is turned off, power is still flowing
into it. To completely disconnect power, unplug
the power cord.
Adapter holder
For
NS-19E430A10
For
NS-22E430A10
Holder mounting hole
AC adapter
Power cord
Note
You can also press TV on the remote control to select
the TV.
Back of TV
Antenna, cable TV, or satellite TV
connection