Use previous channel button
Press
button to switch between the current channel and
the previous one.
Notes:
Use DSP button to know the current channel number
Press
DSP
button to display the
current TV state. If in TV program
viewing, then it will display the
current channel number, sound
mode and remaining sleep time (if
set).
12
ST
SAP
Channel selection
Use Direct Channel Select buttons
Use Channel up/down buttons
You can select your desired TV program by one of the following
methods.
Press
CH+
button, the channel number increases;
Press
, the channel number decreases.
CH-
button
14
CH-
Direct channel
select buttons
CH+
DSP
Sleep 22
?
AIR Mode Direct Channel Selection
When the
Signal Input
menu option in
Search
menu is in the
Air
position, all channels can be selected by directly entering
the channel number.
?
CATV Mode Direct Channel Selection
When the
Signal Input
menu option in
Search
menu is in the
CATV
position, channels can be selected as follows:
Method 1
:
Directly enter the channel number and wait for some time.
Method 2
:
1-9: Press “0” twice, then 1-9 as needed. For example, to
select channel 2, press “002”.
10-99: Press “0”, then the remaining 2 digits. For example, to
select channel 12, press “012”.
100-125: Press the 3 digits in order. For example, to select
channel 120, press “120”.
TV/AV
CCD
DSP
MUTE
1
2
3
4
5
6
7
8
9
0
SCAN
P
CH+
MENU
CH-
V-
V+
STEREO
To scan programs
Press
SCAN
button, the TV set will scan the channels from
current channel to higher channels one by one, every program
will be displayed for about one second and then go on
scanning.
Press
SCAN
button again, the screen will settle at the current
scanned program.
