MP3 SELECTING DIRECTORIES (ALBUMS) BY TITLE
SINGLE SESSION
The following chart is an example of a Windows Explorer display that will appear on your
computer monitor for a single session MP3 CD ROM with Folders/Albums. Check the
added notes to help you understand the MP3 CD unit display and the
playback sequence of folders/albums and tracks on a single session MP3 CD.
MULTISESSION
See the following page for notes regarding this diagram. Computer user does not need
to finalize the CDR disc when the music is downloaded from the internet. The music can
be downloaded at different times until the entire CD disc is fully loaded and can be
played in the unit.
( E) CD-ROM drive
ABOUTTHEDIAGRAM:
•
The arrow pathway shows the sequence of MP3 directory and file playback.
• This example has a total of four MP3 directories.
• Based on this layout, the first file will be “Blur01.mp3” and the last file will be
“Twain15.mp3”.
• “Skipped” denotes a directory which contains non-audio files only. These cannot be
detected or played on this player. When an album contains mixed format files, the non-
MP3 files will be skipped.
EN-11
SPECIALFUNCTIONS
Auto Power Off
SPECIAL FUNCTIONS
When the unit is stopped (standby mode) for approximately 60 seconds, the Auto Power Off
function will be activated and turn off automatically.
Anti-shockFunction
•
If in use, theplayer is likely toreceive shocks orvibrations (i.e. while walking orin a moving
vehicle). As soonas thePLAY/PAUSE buttonis pressed, the ESPfunctionis automatically
activated to allow uninterrupted playback. “ESP” will flash in the display. When “ESP”
stops flashing, the data buffer is full.
•
Should theplayer receiveshocks formore than 180 seconds continuously inCD playback
or 480seconds in MP3 playback, thesoundcanmute for avery short whileand will resume
once the player has stabilized from the shock.
•
To disable ANTI-SHOCK Function, press ESP button once.
Notes:
•
When using the Anti-shock function, the disc will rotate faster than normal playback and
memory is active. Only use the ANTI-SHOCK function when necessary to preserve the
battery life.
•
The Anti-shock function will not correct the errors arising from the use of defective,
scratched or dirty discs.
•
IMPORTANT!DuringMP3playback, theANTI-SHOCK function is always ONand this
function cannot be deactivated.
RADIO OPERATION
1.Set the FUNCTION switch to tuner for RADIO mode, press POWER ON (
) key.
2.Press the MODE button key to select FM MONO or FM STEREO (FM Band only).
3.To turn the radio off press POWER OFF (
) key.
Stereo/Mono
When listening to a radio station broadcasting in FM stereo, press the MODE button to select
the ON mode.The STEREO indicator will show in the display if the FM stereo signal is weak.
Push the MODE button to select the OFF mode (The station will be received in mono but the
background noise will be reduced ).
EN-12
