CHARGING AND USE OF RECHARGEABLE BATTERIES
Rechargeable Battery Operation
This unit can fully recharge the specified rechargeable battery in approxi-
mately 15 hours. The rechargeable batteries (NOT supplied) should be
recharged before they are used for the first time, if they are low in power or
they have not been used for a long period (over 60 days).
1. Open the battery compartment
cover and insert two of the recom-
mended rechargeable batteries,
matching polarity. (1.2V 650mA)
BOTH BATTERIES MUST BE RE-
CHARGEABLE .
2. P l u g i n t h e A C a d a p t o r ( n o t
included). Set the Fuction Switch
to CD mode and the Charge Switch
to the ON position to start charging.
USE ONLY THE AC ADAPTOR
(NOT INLCUDED) RECOMMENDED
WITH THE UNIT FOR CHARGING.
N o t e : C h a r g e i n d i c a t o r w i l l
illuminate.
3. After 15 hours, unplug the AC adap-
tor (not included) and switch the
Charge Switch to the OFF position.
DO NOT CHARGE CONTINUOUSLY
FOR 24 HOURS OR MORE. DOING
SO CAN CAUSE THE PERFOR-
MANCE OF THE RECHARGEABLE
BATTERY TO DETERIORATE.
4. If the operating time decreases drastically even when the rechargeable
nickel-cadmium batteries are properly recharged, purchase a new set of
rechargeable nickel-cadmium batteries. Dispose of nickel cadmium accord-
ing to local environmental laws.
5. When charging new batteries or if the batteries have not been charged for
a long time, playing time may be reduced. In this case, charge and dis-
charge the batteries several times.
NOTE:
-
Do not attempt to recharge, short-circuit, disassemble, heat or throw
the batteries into fire.
-
Do not mix battery types. e.g. alkaline with zinc carbonate.
-
When inserting new batteries, replace all at the same time. Do not
mix old and new batteries.
-
Weak batteries can leak and severely damage the unit.
LISTENING WITH EARPHONES
Connect the plug of the stereo earphones
into the PHONES (GREEN) socket.
Caution
: Avoid excessive volume level and
listening to sound for a long period of time
when using earphones.
!
Adjust volume to the desired level.
To Emphasize the bass sound
Set the BASS BOOST switch to the ON position.
Note:
The bass boost performance will depend on
the VOLUME control setting.
HOLD Switch
This switch prevents accidental selection of an
unwanted function during playback, stop mode
or tuner mode. ("icon" will show on the display.)
In the HOLD “ON” position, no function button
on the unit can be operated (except OPEN).
Moving the switch to the “OFF” position will al-
low the unit to return to normal operation.
4
5
-
+
