background image

CLEANING DISCS

!

Fingerprints should be carefully wiped
from the surface of disc with a soft
cloth.  Unlike conventional records,
compact  discs  have no grooves to
collect dust and microscopic debris,
so gently wiping them with a soft cloth
should remove most particles. Wipe
in a straight motion from the center to
the edge.

!

Never use thinner, benzine, record cleaner or anti-static spray on a com-
pact disc. Such chemicals can damage its plastic surface.

MAINTENANCE

Cleaning the Cabinet

Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak
solution of neutral detergent and water, and then wipe clean.

Cleaning  the Lens

A dirty lens will cause sound skipping and if the lens is very dirty, the CD may
not work. Open  the disc cover and clean the lens as below:

!

  Dust or Dry Particles

Using a camera lens brush/blower, blow
on the lens several times and wipe it
lightly with the brush to remove dust.
Blow on the lens one more time.

!

  Fingerprints

If the lens cannot be cleaned by using
a brush/blower, use a dry cotton swab
starting from the middle and working
to the outside edge.

BASIC DISC PLAY

This CD-player can play Audio Discs such as CD-Recordables. Do not try to play
a CD-ROM, CDi, VCD, DVD or computer CD.

1. Connect the earphones to the PHONES (GREEN) socket.
2. Press the OPEN button to open the CD compartment lid.
3. Adjust the VOLUME to minimum.
4. Insert the disc with the label side facing up.
5. Close the lid securely until a click is heard.
6. Press the PLAY button to start playing.

To Emphasize the bass sound

Set the BASS BOOST switch to the ON position.

Note:

 The bass boost performance will depend on

the VOLUME control setting.

HOLD Switch

This switch prevents accidental selection of an
unwanted function during Playback or Stop mode.
In the HOLD “ON” position, no function button on
the unit can be operated (except OPEN). Moving
the switch to the “OFF” position will allow the unit
to return to normal operation.

Turning Power on and off

This unit has no ON/OFF switch. To turn on and off, press the following buttons.
To turn on: Press 

>II 

PLAY/PAUSE (playback starts).

To turn off: Press 

!

 STOP button once for standby mode.

Press 

!

 STOP button twice to turn off the power.

Auto power-off function

When the unit is stopped (standby mode) for approximately 30 seconds, the
power will automatically turn off.

7

6

Summary of Contents for IS-PA040717








Reviews: