www.insigniarange.com
Last Modified: 18/12/2017
20
Shower Valve
Connect the hoses to the corresponding inlets on the back of the shower.
Device output may differ from the image. Please refer to your outer chrome faceplate in-
side your Insignia shower as a reference point.
IF YOUR DIAL DOES NOT CORRESPOND TO THE APPROPRIATE DEVICE:
Turn on your water to the shower and note which output the water exits from then turn off
the water and swap over the relevant hose.
Alternatively remove the outer chrome knob by removing the chrome cap and loosening
the grub screw (please ensure not to unscrew fully as this will drop within the chrome
knob) this is found on the opposite side to the chrome pillar. Once you have succeeded in
loosening this you can now slide your faceplate to correspond to the device.
Monsoon Head
Hand Shower
Jets
Cold Water Inlet
Outlet for Steam
Hot Water Inlet