www.insigniarange.com
Last Modified 07/10/2015
11
Step 3
Now place the column in between the 2 back glass panels. Once you are happy with the align-
ment, run a bead of
silicone
up both edges and
Rubbergum
along the bottom of the panel and
screw together using
ST20
screws.
(Please not if the column has a rubber seal at the bottom, take the rubber off and apply silicone
inside the rubber and replace back onto the column)
Step 2
Place the mirrored back panel marked
“
Right
”
to the side glass ensuring that the
side glass frame at its wide point is at the rear of the shower and wide black
decorative paint is at the top.
Align the back panel to lip on the side glass and once you are happy with the
alignment, run a bead of
silicone
up the edge and
Rubbergum
along the bottom
of the panels and screw together using the
ST20
screws.
