www.insigniarange.com
Last Modified 21/03/2018
12
Step 3
Now place the column in between the 2 back panels. Once you are happy with the alignment,
run a bead of
silicone
up both edges and
Rubbergum
along the bottom of the panel covering
all the channels in the tub then screw together using
ST14
screws.
(Please note if the column has a rubber seal at the bottom, take the rubber off and apply silicone
inside the rubber and replace back onto the column)
Step 2
Place the back panel to the side glass ensuring that the side glass frame at its
wide point is at the rear of the shower and wide black decorative paint is at the
top.
Align the back panel to lip on the side glass and once you are happy with the
alignment, run a bead of
silicone
up the edge and
Rubbergum
along the bottom
of the panels covering all the channels in the tub then screw together using the
ST14
screws.
