- 26 -
Screw the other end of air exhaust hose into the window adaptor.
Insert the hose connector into the bracket on the back of the unit.
OPERATION
*Always let the appliance rest for at least 2 hours after moving it from one location to another.
Before use, check up whether the exhaust hose has been mounted properly. Plug in the appliance.
1.
Power button
Press the power button to turn on the appliance. Press the button again, the appliance will be turned off.
2.
Temperature/timer increasing button & temperature/timer decreasing button
P
ress the button “
”/“
”
to set your desired room temperature from 15
℃
to 31
℃
. The buttons can
also be used for timer adjustment during timer setting. The value will be increased/decreased by 1 (
℃
/hour) for each press.
3.
Fan speed button
Press the fan speed button to switch the fan speed between low and high. The corresponding indicator
light “LOW”/”HIGH” will illuminate.
4.
Mode button
Press the mode button to choose your desired working mode among cooling, drying and fan. The
corresponding indicator light will turn on when the specific mode is selected.
•
Auto mode
In AUTO mode, the indoor temperature sensor operates automatically to select the desired operation with
cooling or fan: when the room temperature is no less than 24
℃，
the unit automatically selects cooling
mode, and when the room temperature is less than 24
℃，
the unit automatically selects fan mode.
Summary of Contents for 89980108
Page 1: ......
