Page 7
GBxCart RW Manual
Revision 13
Console Program
Setup
1.
Open the \Interface_Programs\GBxCart_RW_vx.x_Console_Interface\config.ini file and change the first number to
your COM port, e.g. 9 = COM9 and change the second number to the baud rate, default is 1Mbit (1000000) which
should work fine. Your COM port can be found in device manager.
2.
Open \Interface_Programs\GBxCart_RW_vx.x_Console_Interface\GBxCart_RW_Console_vx.x.exe and the options
menu should appear.
Inserting/Removing Cartridges
5.
Before inserting the cartridge, select the correct voltage for your cartridge using the switch (GB/GBC use 5V while
GBA uses 3.3V) then connect the USB cable to ensure the correct voltage LED lights up.
6.
Unplug the device from your computer. Insert your cartridge to the device (make sure the cartridge sticker is facing
up), connect the device again and click Open Port as before.
7.
You can now read the header, read the ROM, etc.
8.
When removing cartridges, always unplug the USB cable from the device first before removing the cartridge.
Reading the Header
Press “0” and hit enter to read the cartridge information. Make sure that the “Logo check” comes back as OK
otherwise the cartridge may not be read correctly and you will have to disconnect the device, remove and re-insert the
cartridge.
