Flip the chair base onto the seat so
that the back leg mounting holes align
over the back washers and the front leg
mounting holes align over the slot of the
pucks.
Note: chair bases have a front and
a back, so if they don’t align at first,
the legs are probably sideways or
backwards. Rotate the base 90° or 180°
and try again.
Next, take your long button-head screw
with a metal washer and insert through
the back leg mounting holes and lightly
tighten so that your legs are in position.
With the back secure, pivot the front
pucks so that the mounting holes align
with the slot on the puck. Once you
have the front pucks in position, use
your hex key to fully tighten the flat
head screw in the puck.
Note: Ensure the tab of the mounting
hole is not parallel with the slot as this
can cause the hardware to slip.
NO
YES
Step 2: Attach the Base
Summary of Contents for NOLA DINING CHAIRS
Page 1: ...NOLA DINING CHAIRS ...
