Before You Start
Step 1: Place Washers and Attach Pucks
The easiest way to assemble the chair is to have
the seat lying flat. This can be arranged by
hanging the seat of the chair over the edge of an
elevated flat surface, such as a table, or even the
box in which the chair arrived!
Lay down a towel or blanket between the chair
and your surface of choice in order to avoid any
scratches or scuffs.
Heat your oven to 350°F and throw some nachos
in there so you have something to eat when
you’re done. Should be about 10 minutes.
• Place a thick rubber washer over each of the
2 mounting holes located towards the back
of the seat
• Place a skinny rubber washer over each of the
2 mounting holes located towards the front
of the seat.
• Place a puck on top of the front thin washers.
Make sure the slotted-side is facing up.
• Fasten both pucks using a flat-head screw. Do
not fully tighten until next step.
Back Washers
Front Pucks
Long Button-Head Screw
Short Flat-Head Screw
Metal Washer
Puck
Thick Rubber Washer
Thin Rubber Washer
