Step 6: Attachment Options (Continued)
First choose the height you would like your
shelves to be. There are 2 options, either
use the 2 top holes, or the 2 bottom holes.
Next, insert 2 thumb screws through your
selected holes on the bracket.
Take your t-slot nuts and place them onto
your screws and turn them once. With
the long side of the nuts parallel to the
ground insert the nuts and screws into the
slots on the back panel.
With the bracket in position, slowly tighten
the thumb screws, the t-slot nut should
rotate slightly so that it is perpendicular to
the ground.
Once it is perpendicular, fully tighten the
screws. Repeat for all shelves.
IMPORTANT! Your t-slot
nuts should look like
this, failure to attach
correctly could result in
your shelf failing.
View from the inside
T-Slot Nut
Summary of Contents for JORN DESK
Page 1: ...JORN DESK ...
Page 11: ...DONE ...
