Step 1: Attach Legs
Step 2: Attach Armrests
Place the seat upside down
on a table. Use a soft surface
to protect from scratches.
Align the front and back legs
with the corresponding holes
in the seat bottom.
Attach with the 55mm bolts
and washers. Tighten to snug.
Set the wooden armrest face down.
Set the leg and seat assembly on
the armrest. (The “flat’’ side of the
armrest attaches to the legs). Position
the assembly so that the legs are
roughly centered on the armrest and
approximately 1-2 inches back from the
front of the arm.
Once you have the assembly centered
front and back and are satisfied with the
location, use a phillips head screwdriver
and the 4 self tapping wood screws to
attach the legs to the armrest.
Rear
Front
Summary of Contents for ADA LOUNGE CHAIR
Page 1: ...ADA LOUNGE CHAIR...
