Step 1: Assemble the Back and Seat Frames
Before you begin, Be sure that you’re
assembling on a non-abrasive surface,
such as carpet or flattened cardboard.
To identify which is which, know that the
frame with the narrower slats is for the
back, while the frame with the wider slats is
used for the seat.
Prepare 4 short bolts by sliding on a split
washer and then a flat washer.
Place the Back frame on its side,
as shown. Lay the seat frame so
that the four corresponding holes
are prepared to line up.
Insert a bolt into each hole. Hand
tighten as you go.
Further tighten with the allen key,
but not all the way. This will come
in handy later.
Summary of Contents for ACE LOUNGE CHAIR
Page 1: ...ACE LOUNGE CHAIR...
