BCI Mfg Inc P.O. Box 1207 North Plains, OR 97133 [email protected]
ASSEMBLE THE FORK STAND
This information applies to both the Core and the Kickr installation.
The fork stand must be unfolded and locked in the upright position with 6
screws.
ATTACHING THE FORK STAND
Remove your front wheel and place the E-flex fork stand under the bike’s
front dropouts. Lower the fork onto the fork stand and fasten it with either
your thru axle or a standard quick release.
Point your fork straight ahead for proper alignment. Now tighten the rear
dropout and you are ready to ride. The Kickr/Core will perform normally.
The E-flex does not alter the resistance performance of either trainer.
