initial
setup
1.
Windows 8 or newer, Linux 2.6.32 or later, or Ubuntu 14.04 or later required.
2.
Install the appropriate Windows drivers onto your system from:
https://www.inseego.com/software-downloads/
3.
The Skyus SC typically does not require drivers for Linux systems using the
modem’s built in CDC-ECM interface.
4.
USB 2.0 port (5VDC @ 1A) required.
System Requirments
1.
Verify your device is active with your
cellular carrier representative.
2.
Connect antennas to both SMA
connectors for cellular connection.
3.
Connect the device to your system
with the provided USB cable.
Connect your Device