Page | 8
Uplink Fiber Optical and RJ45 Cable Installation:
1.
RJ45 Uplink Cable:
Two
WECK0001 kits are included as the standard package. Simply
follow
Figure 2
to assemble the connector with an Ethernet cable and connect to RJ45 1 and RJ45 2
Uplink Ports to a backbone Gigabit Network Switch
2.
SFP Uplink Cable:
SFP 1 ~ SFP 4 Uplink Ports are used to connect the system with a fiber optic
infrastructure or a Backbone Gigabit Fiber Optical Network Switch with the following steps:
a.
FOWC0001 Fiber Optic Waterproof Connector is an optional accessory. When purchase,
please follow Figure 4 for fiber cable and connector assembly.
b.
Attach the duplex LC connector, FOWC0001, with the fiber optic cable into one of the
active SFP Ports
c.
Connect the other end of the cable to a device - a Fiber Optical Network Switch or a
Media Converter.
Figure 4
: WECK0001 Waterproof Ethernet Cable Assembly
Summary of Contents for Link Power LPS2800-T2 Series
Page 11: ...Page 11...
