Safety Precautions
Before you use this product, be sure to carefully read this
Installation Manual and the separate User’s Guide to
ensure product is installed and used properly. Insane
Audio is not responsible for any problems that arise as a
result of failure to follow the instructions provided.
This manual includes a number of symbols that are
intended to help you use the product safely, to prevent
harm to you, others and protect against any property
damage. These symbols and their meanings are listed
below. Make sure you fully understand these symbols
before you begin the installation.
Disconnect the negative battery terminal before
beginning installation.
Explanations of Injury and Damage That May
Result from Incorrect Use
WARNING
Ignoring the content marked by
this indication and using the
product incorrectly is expected to
lead to death or serious injury.
CAUTION
Ignoring the content marked by
this indication and using the
product incorrectly is expected to
lead to death or serious injury.
Warnings
Do not unassemble or modify the product. Doing so
could lead to an accident, fire or electrical shock.
Store screws and other small objects where children
cannot reach them. If a small object is swallowed,
consult with a doctor immediately.
When replacing fuses be sure to use the fuses with the
specified current rating. Failing to do so could lead to an
accident or fire. Only connect the product to a 12V DC
negative ground car. Failing to do so could lead to an
accident or fire.
Since this vehicle has two batteries, disconnecting the
battery is not a good option. Take caution when testing
circuits. Failing to do so could lead to electric shock or
injury.
Do not cut the insulation on a cord and take power from
another device. Doing so could lead to fire or electric
shock.
Do not install the product in a location where it will
obstruct the driver?s forward view; interfere with the
operation of the steering wheel, gear shift, or the like; or
pose a threat to passengers. Doing so could lead to an
accident or injury.
When making a hole in the vehicle body, be careful to
avoid damaging pipes, the fuel tank, electrical wiring,
and the like. This kind of damage could lead to an
accident or fire.
When installing and grounding the product, do not use
any of the bolts or nuts of the steering wheel, brakes,
fuel tank, or the like. Doing so could make the brakes
stop working or could lead to fire.
