uConnect Modules
1. With your dash still opened up, remove your AC controls (they
are on pressure clips).
2. You should see the old uConnect module (two screws hold it in
place).
3. Unplug it and remove it.
Certain uConnect modules will still remain active even after
your OEM radio has been removed. This may result in the
uConnect module placing an un-necessary drain on your vehicle’s
battery even after your Jeep is powered off.
SPECIAL NOTE FOR VEHICLES THAT
PREVIOUSLY HAD OEM
uCONNECT MODULES
uConnect module pictured above
To remove your uConnect module:
CAUTION
