Basic Operations
6
2.
Hotkey
2.1
Power
1.
Press [Power] button to switch from TV mode to Standby mode
2.
In Standby mode press [Power] button again to switch back to TV mode.
The last active channel will be showed.
3.
To switch off the STB complete press the main power button.
2.2
TXT
1.
Press [TXT] button in TV mode to open the teletext page. This service is
depending on the support of the channel provider.
2.
If the channel does not support teletext information, it will show “No
Teletext Data” on the screen.
2.3
Mute
1.
Press the [Mute] button to mute the sound. On the screen an icon will be
displayed to indicate the muted sound.
2.
Press the [Mute] button again to restore the sound.
2.4
Number
In TV mode you can enter the channel number directly with your remote control
unit and confirm the number with the OK button to change to the desired
channel.
2.5
M/P (Multi-Pictures)
In full screen, press [0] key can enter the
Multi-Pictures mode like below:
1.
In Multi-Pictures mode, the screen
will display 9 channels’ preview
window (static) from the current
channel. And only the highlight
preview program can play normally.
