11
Advanced Operation
● Numeric 4 (Move) button
Move selected channel. Use [◄/►] button to move channel and press [OK] button to confirm.
● [◄/►] (Group
）
button
Switch between favorite groups. (If available)
● [MENU] button
Exit from current interface.
1.2 Radio Channel List
All found radio channels will be listed here.
Refer to the operation of TV Channel List (Item 1.1) for detail instructions.
1.3 Delete All Favorite
Press [OK] button to delete all favorite TV and Radio channels. Operate according to screen.
1.4 Delete All
Press [OK] button to delete all TV and Radio channels. Operate according to screen.
1.5 Group Rename
Use [▲/▼] button to select a group from the list, press [OK] button to confirm to rename. Use
navigation buttons to input according to screen.
2. Installation
Move cursor to “Installation” and press [OK] button to enter in its submenu. There are 3 options
which are listed below.
Auto Scan
Channel Scan
Tuner Setting
Use [▲/▼] button to select submenu, [OK] button to enter in its interface, [EXIT] button to quit.
2.1 Auto Scan
● Scan Mode: Free (free channels), All (both free and paid ones);
● Search:
Use [◄/►] button to choose a preferred scan mode, either All or Free, then move the cursor to
Search and press OK button to confirm the operation of auto scan. As auto scan is under way, all
channels (TV channels and radio channels) that have been detected will be listed respectively in the
window. Under the window are the constantly changing data concerning frequency band, frequency,
channel No. modulation type etc.
Once the scan is completed, the receiver will play the first TV channel automatically. User can use
CH+/ CH- button to shift channels as like or press OK button to pop up TV Channel List and select a
preferred channel to enjoy. Or press TV/ R button to toggle between TV channel and radio channels.
2.2 Channel Scan
●
Scan Mode
: By Channel or By Frequency.
Scan a particular channel by the exact channel Number or frequency. For By Channel mode, user
will have to set Scan Band, Ch No. and Network Search in the meantime. For By Frequency mode, user
will have to set the correct Frequency and Bandwidth data together.
●
Scan Band
: VHF or UHF.
Scan channels within either VHF (Very High Frequency) or UHF (Ultra High Frequency) or both
bands. Such setting is active only in By Channel mode.
●
Ch No.
: Channel 5~12 ( VHF), or Channel 21~69(UHF)
Choose the exact channel number to search for a designated channel. It is activated only in “By
Channel” mode.
●
Frequency
: 174~230MHz (VHF) or 470~862MHz (UHF).
Enter the correct frequency parameter of certain channel for scan. It is activated only in “By
Frequency” mode.
●
Band Width
: 6MHz, 7 MHz or 8 MHz.
Set the right bandwidth of the region where the receiver is in use. It is activated only in “By
Frequency” mode.
●
Network Search
: On or Off
Activate or deactivate network search. It works in both “By Channel” Mode and “By Frequency”
mode.
● Search:
Click Search with OK button to start scanning manually.
