6
3.Receipt and Installation
2021/12
3.
Receipt and Installation
3.1.
CHECKING THE SHIPMENT
The first thing to do on receiving the valve is to verify that it is as specified on the delivery note.
The valve and any other components should be checked and if found to be damaged and/or not complete the carrier
should be informed and a report submitted as soon as possible. Each valve is identified with an engraved
manufacturing/serial number and this must be included in all documents and correspondence.
3.2.
DELIVERY AND UNPACKING
INOXPA will not be responsible for the inappropriate unpacking of the valve and its
components.
3.2.1.
Delivery:
Check that all the parts indicated on the delivery note are correct
•
Complete valve.
•
Its components (if supplied).
•
Delivery note.
•
Instruction manual.
3.2.2.
Unpacking:
•
Remove all traces of packing materials from the valve or parts.
•
Inspect the valve or its constituent parts for possible damage caused during transport.
•
Avoid any possible damage to the valve and its components.
3.3.
STORAGE
If the valve and/or diaphragm is not going to be assembled for immediate use, and are stored for later installation, they
must be stored in a closed area according to the following conditions:
Temperature
from 15ºC to 30ºC
Relative humidity
<60%
No sunlight
store in opaque bags
Open-air storage of the equipment is
NOT
allowed.
For valves that have to be stored for a long time, the body must be disassembled as the
diaphragm may become excessively deformed and/or damaged. In order to disassemble the
body, see sections 7.1 and 7.2 of the chapter
In order to achieve optimum behaviour of the diaphragms, do not keep them stored for more than 3 years. After this
time, they may degrade and lose their properties.
VALVULAS NEUMATICAS / AIR OPERATED VALVES
NºFIGURA:
TAMAÑO:
FIGURE NR:
SIZE:
TIPO ACTUADOR:
ACTUATOR TYPE:
PRESION DE TRABAJO:min
/máx
WORKING PRESSURE:min
/max
Nº FABRICACION:
MODELO:
MANUFACTURING NR.:
MODEL:
Serial number
