Technical Specifications
22
INOXPA S.A.U.
· 01.030.30.05EN · (0) 2021/01
9.1. NOISE LEVEL
The indicated noise levels correspond to the standard pump, with maximum impeller and shrouded motor, running
at approximately 2900 rpm, at the point of the best efficiency and with a motor with sufficient power.
These values were taken at a distance of 1 m from the pump and at a height of 1,6 m above the floor level. The
measurements were carried out according to the standard EN 12639 / ISO 3746 Grade 3 with a tolerance of ±3
dB(A).
Pump type
Sound
pressure L
pA
dB(A)
Sound
power L
wA
dB(A)
HCP 40-110
61
74
HCP 40-150
63
75
HCP 40-205
70
84
HCP 50-150
71
84
HCP 50-190
78
92
HCP 50-260
70
84
HCP 65-175
72
85
HCP 65-215
78
92
HCP 65-250
79
93
HCP 80-175
77
90
HCP 80-205
80
94
HCP 80-240
77
91
It must be borne in mind that the noise levels can greatly increase if reducers, elbows or other fittings are
installed near the pump.
9.2. WEIGHTS
MOTOR
IEC
71
80
90
100
112
132
160
180 200 225
kW 0,37 0,55 0,75 1,1 1,5 2,2 2,2
3
3
4 5,5 7,5
11
15 18,5 22
30
45
HCP 40-110
18
19
26
HCP 40-150
30
32 36 35
HCP 40-205
42 41
52 58
77 86
HCP 50-150
30
36 35
47
52
HCP 50-190
42
52
57 77 85
HCP 50-260
92 101 180 189 208 261
HCP 65-175
55
60 80 88
HCP 65-215
85 93 173 182 201
HCP 65-250
92
180 189 208 261 312
HCP 80-175
55 61 80 89 169 178
HCP 80-205
85
173 182 201 253
HCP 80-240
93 106
209 261 313
401
