2021/11
7.Maintenance
17
7.4.
DISASSEMBLY / ASSEMBLY OF THE TABLE BLENDER
7.4.1.
Hopper, venturi tube and discharge tube (only in mixer option)
Disassembly
1.
Remove the clamp (91) from the bottom of the hopper.
2.
Remove the blind nuts (54) and the flat washers (53). Extract the hopper (101) by moving it upward, taking
into account that the flat washer (18) and the clamp seal (91B) will be unattached.
3.
Remove the butterfly valve (96) removing the clamp (91) and the seal (91C) below it.
4.
Open the tube clamp (38A) to loosen the venturi tube (102). Then, remove the clamp (91) and seal (91B) that
fasten the venturi tube (102) to the pumpcasing.
5.
Remove discharge tube (98) that connects the pump (01) to the elbow clamp (91F) from the mixer entrance
(02) by removing clamp (91D) and seal (91E) from the outlet pump, and the clamp (91A) and seal (91C) from
the mixer entrance.
6.
Then, remove the discharge valve (96A) from the outlet pump by removing the clamp (91D) and seal (91E).
02
.1
00
.3
2.
00
07
02
.1
00
.3
2.
00
08
