Installation
INOXPA S.A.U.
·
01.611.30.08EN · (0) 2020/02
7
5. Installation
5.1. RECEPTION OF THE PUMP
INOXPA cannot be held responsible for the damage sustained by the equipment during transport or
unpacking. Please visually check that the packaging is not damaged.
The pump package includes the following documents:
•
shipping documents,
•
installation, service and maintenance instructions manual,
•
instructions and service manual of the motor
1
.
Unpack the pump and check the following:
•
The suction and discharge connections of the pump, removing any rest of packaging materials,
•
The pump and the motor are not damaged,
•
If the equipment is not in good condition and/or any part is missing, the carrier should report accordingly as
soon as possible.
5.2. IDENTIFICATION OF THE PUMP
Each pump has a nameplate with the basic data required to identify the model.
5.3. TRANSPORT AND STORAGE
The KIBER KSF and KIBER KSFT pumps are often too heavy to be stored manually.
Use an appropriate means of transport.
Use the points which are indicated in the drawing for lifting the pump.
Only authorized personnel should transport the pump.
Do not work or walk under the heavy loads.
1
If the pump has been supplied with a motor from INOXPA
Serial number
ATTENTION
0
1
.6
1
1
.3
2
.0
0
0
3
0
1
.6
1
1
.3
2
.0
0
0
4
