INOXPA HLR, Installation, Service And Maintenance Instructions

Page: 9 / 48

8 4.Installation (A) 2021/11
4. Installation
4.1. PUMP RECEPTION
INOXPA is not responsible for any deterioration of the material as a result of its transportation or
unpacking. Visually check that the packing has not suffered any damage.
The pump will be accompanied by the following documentation:
• Dispatch notes.
• Pump Instruction and Service Manual.
• Drive Instruction and Service Manual (*).
(*) If the pump has been supplied with a drive from INOXPA.
Unpack the pump and check the following:
• The pump suction and delivery connections, removing the
remains of any packing material.
• Check that the pump and the motor have not suffered any
damage.
• Should the pump not be in proper condition and/or does not
have all the parts, the haulier must draw up a report as
soon as possible with regard to the same.
4.1.1. Pump identification and marking
Pump plate
4.2. TRANSPORT AND STORAGE
HLR pumps and pumping units are often too heavy to be handled manually. Use an adequate means
of transport.
Use the points which are indicated in the drawing for lifting the pump.
Only authorized personnel should transport the pump.
Do not work or walk under heavy loads.
Lift the pump as shown below:
•
Always use two support points placed as
far apart as possible.
• Secure the support so that it will not
move.
• See chapter 8.
Technical Specifications
to
consult dimensions and weights.
Serial number