© Inovonics, 2009 - www.inovonics.com
4
Figure 3
EE4216M Terminals
6 Mount the Receiver
Caution:
Mount the receiver in a location removed from metal. Metal objects (duct
work, wire mesh screens, boxes) will reduce RF range.
Caution:
Graded applications must secure the housing cover with the included screw.
1.
Use the provided anchors and screws to mount the receiver in a location
accessible for future maintenance.
2.
Perform a walk test, activating each transmitter assigned to the receiver and
ensuring a good signal.
7 Specifications
Dimensions:
165 mm x 89 mm x 25 mm (6.5" x 3.5" x 1").
Weight:
280 g (.62 lb)
Operating environment:
0°- 60°C (32°- 140°F), 90% relative humidity, non-
condensing.
Power requirement:
11 - 14 VDC; 150 mA
Current consumption:
Approx. 150 mA
Output specifications:
Open collector, drive down to .4V @ 100 mA; N/O receiver
case tamper contact closure, N/O receiver jam input indication.
Input specifications:
A low is less than .5 V; a high is greater than 2.5 V. Reset input:
Contact closure, momentary low.
Receiver type:
Frequency hopping spread spectrum.
Operating frequency:
868-869 MHz
Tamper:
Type B, fixed device.
Number of points/Transmitters:
16.
Number of outputs:
Nine open collector outputs
Event history log capacity:
50 events (first-in, first-out replacement).
Figure 4
Tamper, Reset, Arm and Clear to Set Circuits
7.1 Means of Conformity
Inovonics Wireless Corporation declares that the product listed above is in conformity
with the essential requirements and provisions of the following Council Directives:
• R&TTE Directive
• Low Voltage Directive
• EMC Directive
and conforms to the following standards:
• EN 300 220 Receiver Class 1, Environmental Category 1
• EN 60950
• EN 301 489
• EN 50130 Environmental Class II
• EN 50131 Security Grade 2
• EN 20131-2-2:2008
• TS 50131-2-2:2004
• PD6662:2004 Incorporating Amendments Numbers 1 and 2
Product tested by Telefication B.V.
8 Warranty/Disclaimer
Caution:
Changes or modifications to this unit not expressly approved by Inovonics
Wireless Corporation may void the installer's authority to operate the equipment as
well as the product warranty.
Inovonics Wireless Corporation ("Inovonics") warrants its products ("Product" or
"Products") to conform to its own specifications and to be free of defects in materials
and workmanship under normal use for a period of thirty-six (36) months from the date
of manufacture. Within the warranty period, Inovonics will repair or replace, at its
option, all or any part of the warranted Product. Inovonics will not be responsible for
dismantling and/or reinstallation charges. To exercise the warranty, the User ("User",
"Installer" or "Consumer") must work directly through their authorized distributor who
will be given a Return Material Authorization ("RMA") number by Inovonics. Details of
shipment will be arranged directly through the authorized distributor.
This warranty is void in cases of improper installation, misuse, failure to follow
installation and operating instructions, alteration, accident or tampering, and repair by
anyone other than Inovonics.
This warranty is exclusive and expressly in lieu of all other warranties, obligations or
liabilities, whether written, oral, express, or implied. There is no warranty by Inovonics
that Inovonics product will be merchantable or fit for any particular purpose, nor is
there any other warranty, expressed or implied, except as such is expressly set forth
herein. In no event shall Inovonics be liable for an incidental, consequential, indirect,
special, or exemplary damages, including but not limited to loss of profit, revenue, or
contract, loss of use, cost of down time, or interruption of business, nor any claim
made by distributor's customers or any other person or entity.
This warranty will not be modified or extended. Inovonics does not authorize any
person to act on its behalf to modify or extend this warranty.
This warranty will apply only to Inovonics Products. Inovonics will not be liable for any
direct, incidental, or consequential damage or loss whatsoever, caused by the
malfunction of Product due to products, accessories, or attachments of other
manufacturers, including batteries, used in conjunction with Inovonics Products.
Note:
E-mail [email protected] for a copy of the CE Declaration of Conformity.
Vs
Ja
m
output
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 8
Output 9
Ground
Ta
mp
er
outpu
t
Re
set i
n
put
Cl
ear to
se
t
output
Caution:
Incorrect
connections
may cause
damage to the
unit
GND
GND
GND
GND
Tamper
Reset
Clear to Set
Jam
