WALK TEST:
With the cover on the unit, quickly (less than ½ second) pass a magnet near the Walk Test Reed Switch (Figure 1-G). This activates a 1-minute walk test mode. Within this
period, the Test LED will light every time the PIR senses motion. The unit will not transmit alarm signals during this test period.
Note: The LED indicator lights only during 1-minute walk test period, and during transmission test.
TRANSMISSION TEST:
With the cover on the unit, hold a magnet near the Walk Test Reed Switch for at least 1 second. This activates a 1-minute transmission test mode. Within this period, the unit
will transmit alarm and restoral cycles at regular intervals for approximately one minute. The LED will light every time the unit transmits.
OPERATION:
The ES1265 transmitter signals an alarm condition when motion is detected by the sensor. Once an alarm condition is signaled, further alarms are suppressed until no motion
is sensed for a period of more than 90 seconds.
TECHNICAL SPECIFICATIONS:
Dimensions:
5.2" x 2.25" (131mm x 57mm)
Weight:
6.52 oz. (185g)
Detection Method:
4-element PIR
Operating Temperature:
32°F to 120°F (0°C to 49°C)
Humidity:
10% to 90% non-condensing
Battery:
Inovonics BAT604 (3.0V lithium Duracell DL123A)
Note: Battery is supervised
Typical Battery life:
2 years in location with low to moderate activity*
Visible Light Protection:
Stable against halogen light 8 feet (2.4m) or reflected light
Temperature Compensation:
Yes
Pulse count:
Selectable single pulse or multiple pulse
LED indicator:
lights only during 1-minute walk test period and during transmission test.
Frequency
User selectable for Europe, Australia, New Zealand, US and MF4232 receivers. See Figure 1.
* The battery life of a PIR transmitter is highly dependent on "traffic" in its coverage area. PIRs installed in high-traffic areas may experience reduced battery life.
CHANGING THE BATTERY
1. Carefully remove old battery.
2. Install new battery.
IMPORTANT: P
Press rreset b
button tto rre-iinitialize tthe ttransmitter.
Discard old battery in accordance to the local laws and practices. Inovonics Wireless does not take responsibility for batteries that are not discarded properly.
WARRANTY & DISCLAIMER
Inovonics Wireless Corporation ("Inovonics") warrants its products ("Product" or "Products") to conform to its own specifications and to be free of defects in materials and
workmanship under normal use for a period of twenty-four (24) months from the date of manufacture. Within the warranty period, Inovonics will repair or replace, at its
option, all or any part of the warranted Product. Inovonics will not be responsible for dismantling and/or reinstallation charges. To exercise the warranty, the User ("User",
"Installer" or "Consumer") must work directly through their authorized distributor who will be given a Return Material Authorization ("RMA") number by Inovonics. Details of
shipment will be arranged directly through the authorized distributor.
This warranty is void in cases of improper installation, misuse, failure to follow installation and operating instructions, alteration, accident or tampering, and repair by anyone
other than Inovonics.
This warranty is exclusive and expressly in lieu of all other warranties, obligations or liabilities, whether written, oral, express, or implied. There is no warranty by Inovonics
that Inovonics product will be merchantable or fit for any particular purpose, nor is there any other warranty, expressed or implied, except as such is expressly set forth
herein. In no event shall Inovonics be liable for an incidental, consequential, indirect, special or exemplary damages, including but not limited to loss of profit, revenue or
contract, loss of use, cost of down time, or interruption of business, nor any claim made by distributor's customers, or any other person or entity.
This warranty will not be modified or extended. Inovonics does not authorize any person to act on its behalf to modify or extend this warranty. This warranty will apply only
to Inovonics Products. All other products, accessories or attachments used in conjunction with Inovonics equipment, including batteries, will be covered solely by their own
warranty, if any. Inovonics will not be liable for any direct, incidental or consequential damage or loss whatsoever, caused by the malfunction of Product due to products,
accessories, or attachments of other manufacturers, including batteries, used in conjunction with Inovonics Products.
The User recognizes that a properly installed and maintained security system may only reduce the risk of events such as burglary, robbery, personal injury and fire. It does not
insure or guarantee that there will be no death, personal damage, and/or damage to property. Inovonics does not claim that the Product may not be compromised and/or
circumvented, or that the Product will prevent any death, personal and/or bodily injury, and/or damage to property resulting from burglary, robbery, fire or otherwise, or that
the Product will in all cases provide adequate warning or protection.
Inovonics shall have no liability for any death, injury, or damage, however incurred, based on a claim that Inovonics Products failed to function. However, if Inovonics is held
liable, directly or indirectly, for any loss or damage arising under this limited warranty or otherwise, regardless of cause or origin, Inovonics' maximum liability will not in any
case exceed the purchase price of the Product. This will be the complete and exclusive remedy against Inovonics.
Warning: The U
User sshould ffollow aall iinstallation, o
operation, aand m
maintenance iinstructions. The User is strongly advised to conduct Product and systems tests at
least once each week. Changes in environmental conditions, electric or electronic disruptions, and tampering, may cause the Product to not perform as expected.
Warning: IInovonics w
warrants iits P
Product tto tthe U
User. The User is responsible for exercising all due prudence and taking necessary precautions for the safety and
protection of lives and property wherever Inovonics Products are installed. Inovonics strongly advises the User to program Products to be supervised when used in
applications affecting life safety. Users are warned that unsupervised devices are subject to undetected failure due to malfunction, battery failure, tampering, or
changes in environment.
TTh
hiiss p
prro
od
du
ucctt b
beeaarrss tth
hee CCEE m
maarrkk aan
nd
d cceerrttiiffiiccaattiio
on
n..
P
Plleeaassee eem
maaiill ssu
up
pp
po
orrtt@
@iin
no
ovvo
on
niiccss..cco
om
m tto
o rreeq
qu
ueesstt tth
hee ""D
Deeccllaarraattiio
on
n o
off CCo
on
nffo
orrm
miittyy..""
,
,
,
© 2004 Inovonics Wireless Corporation
e-mail: [email protected] • www.inovonicswireless.com
04098A
L
