- 61 -
Parameter Table
Parameter
Parameter Name
Setting Range
Unit Default Commission
F5-07
AO1 function selection
0: Running frequency
1: Set frequency
2: Output current
3: Output torque (absolute value)
N.A
3
-
Group F6: start and stop control
Parameter
Parameter Name
Setting Range
Unit Default Commission
F6-00
Start mode
0: Direct start
1: Rotational speed tracking
restart
2: Pre-excited start
(asynchronous motor)
N.A
0
-
F6-03
Startup frequency
0.01 to 10.00
Hz
0.20
-
F6-04
Startup frequency active
set time
0.0 to 100.0
s
0.5
-
F6-05
DC injection 1 level
0 to 150
%
70
-
F6-06
DC injection 1 active set
time
0.0 to 5.0
s
0.5
-
F6-07
Acceleration/
Deceleration mode
0: Linear acceleration/
deceleration
3: S-curve acceleration/
deceleration C
N.A
3
-
F6-08
Time proportion of
S-curve at Accel start
0.0% to min. [(100.0% - F6-09),
80%]
%
80.0
-
F6-09
Time proportion of
S-curve at Accel end
0.0% to min. [(100.0% - F6-08),
80%]
%
20.0
-
F6-10
Stop mode
0: Decelerate to stop
1: Coast to stop
N.A
0
-
F6-11
DC injection 2 frequency
threshold
0.00 Hz to max. frequency
Hz
0.10
-
F6-12
DC Injection 2 delay ON
set time
0.0 to 36.0
s
0.0
-
F6-13
DC injection 2 level
0 to 150
%
70
-
F6-14
DC injection 2 active set
time
0.0 to 5.0
s
0.5
-
F6-26
Time proportion of
S-curve at Decel start
0.0% to min. [(100.0% - F6-27),
80%]
%
50.0
-
F6-27
Time proportion of
S-curve at Decel end
0.0% to min. [(100.0% - F6-26),
80%]
%
50.0
-
