6
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 /WMA FILE WHICH STORED IN THE MEMORY
MEDIA WITH USB CONNECTING PORT OR SD/MMC MEMORY CARD.
1. SET THE SYSTEM AT STANDBY MODE FIRST OR OTHER FUNCTION
EXCEPT SD OR USB MODE.
2. PLUG-IN THE USB PEN-DRIVE WITH THE FACE UP & MAKE SURE IT
GOING INTO COMPLETELY OR INSERT THE MEMORY CARD IN THE
DIRECTION OF THE ARROW AS SHOWN IN THE LABEL ON THE
UNDERSIDE OF THE MEMORY CARD SLOT COVER. INSERT STRAIGHT
WITHOUT BENDING.
CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD
DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA (USB THUMB
DRIVE / SD/MMC CARD). CHECK TO BE SURE THE DIRECTION IS
CORRECT BEFORE CONNECTION.
3. PRESS FUNCTIONS BUTTON (7) TO “
“ SD CARD MODE OR “
“ USB MODE.
4. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER CONNECTING, AND
LCD DISPLAY (16) WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES BEING DETECTED.
5. REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE.
REMARK
-
THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 OR WMA FORMAT ONLY AT USB/SD MODE
BUT NOT OTHER MUSIC FILE FORMAT.
-
IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3 ENCODING
FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS NOT A
MALFUNCTION OF THE SYSTEM.
-
USB PORT DOES NOT SUPPORT CONNECTION WITH USB EXTENSION CABLE AND IS NOT DESIGNED
FOR COMMUNICATION WITH COMPUTER DIRECTLY
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO EITHER
CD OR TUNER MODE FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY, FOR
MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD BEING PARTIALLY
EJECT AND YOU CAN REMOVE IT BY HAND.
MORE FEATURES
A. SLEEP SETTING
1. PRESS “ SLEEP ” BUTTON (3) AND SLEEP INDICATOR “
“ SHOWN ON THE LCD DISPLAY (16).
2. KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 80 > 70 > …..>10
MINUTES RESPECTIVELY.
3. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
4. TO CANCEL THE SLEEP MODE, PRESS “ SLEEP ” BUTTON (3) UNTIL THE “
“ INDICATOR DISAPPEAR ON
LCD DISPLAY (16).
REMARK:-
IF PRESS THE SLEEP BUTTON ONCE AND THE “
“ INDICATOR APPEAR ON THE LCD (16), THE SYSTEM
WILL GOTO STANDBY MODE AUTOMATICALLY AFTER SELECTED MINUTES.
B. ALARM CLOCK SETTING
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY
CD/TUNER/USB/SD OR BUZZER SOUND RESPECTIVELY.
FIRST, SET THE UNIT AT STANDBY MODE. THEN PRESS AND HOLD THE “ ALARM ” BUTTON (2) FOR FEW
SECONDS TO ENTER THE SETTING MODE, THE LCD DISPLAY (16) WILL SHOW “ ON TIME : AND THEN FIRST
TWO DIGITS OF CLOCK WILL FLASHING:-
1) WAKE UP TIME : PRESS SKIP UP
/
DOWN
“ BUTTON (11) TO SET THE HOUR & THEN PRESS
“ ALARM “ BUTTON (2) AGAIN TO CONFIRM. THEN PRESS SKIP UP
/
DOWN
“ BUTTON (11) TO SET THE
MINUTES.
2) WAKE UP SOURCE : PRESS THE “ ALARM “ BUTTON (2) TO ENTER THE SOURCE MODE, PRESS SKIP
UP
/
DOWN
“ BUTTON (11) TO SELECT CD, USB. SD. TUNER OR BUZZER MODE RESPECTIVELY.
3) WAKE UP VOLUME : PRESS THE “ ALARM “ BUTTON (2) TO ENTER THE VOLUME SETTING MODE, THEN
PRESS SKIP UP
/
DOWN
“ BUTTON (11) TO PRE-SET THE WAKE UP VOLUME LEVEL.
