Inova TableBed, Assembly Manual

Page: 32 / 55

Tech support is readily available if needed
Email: support@inovabed.com
Phone: 866.528.2804
A.
With two people, one on each side of the
Bed Platform Assembly, lift up the assembly
and locate it into the Bed Cabinet as shown.
Once the Bed Platform has been located, and
is supported by the Tabletop and Flipper
Assembly proceed to the following step for
attachment instructions.
B. Lower the Head Rail into place, behind the
Angle Iron and on top of the Bed Platform.
C. Insert the H-060 Machine Screws through
the Angle Iron and Head Rail, then tighten.
D. Attach the Head Rail to each of the Side Rails
with H-077 Wide Angle Brackets and H-019
Machine Screws at each corner.
STEP 13:
Attach Head Rail to Bed Platform & Place Bed Platform into Cabinet
A
Head Rail
Bed Platform
B
Angle Iron
Head Rail
C
H-060
D
Head Rail
H-019
Side Rail