Replay User Manual v.
1.2
Page 25
7
Operation with logical inputs
7.1 Introduction to the logical input operation mode
Replay can also reproduces individual (message) audio files with direct selection from six
opto-isolated inputs (par. 3.4). Replay enters this working mode if there are no palimpsest
files or playlists present.
Activation is carried out directly or in binary combination, up to a maximum of 63 files,
using the inputs IN 1, IN 2, IN 3, IN 4, IN 5, IN 6. For the manner of connection, see the
paragraph 3.4.
IMPORTANT:
C12V output to Vlink input.
7.2 Input management parameters
(CONFIG.TXT)
Example:
TPCM=10
MICP=1
MIRS=0
TPCM (Time of persistence of input command)
TPCM
Setting the time of persistence of input command (waiting time before Replay
interprets the input command).expressed in tenths of one millisecond (value
between 0 and 255 in decimal):
0=no delay
1=10mSec
2=20mSec
100= 1 Second.
MICP (Continuous Play input mode)
MICP
0=once the reproduction of the coded file – requested by the input code - is
over, stand-by will be activated.
1=the requested coded file is continuously reproduced as long as the relevant
code stays in input.
