Panelplayer User Manual v.1.4
Page 18
In this case, Panelplayer remains in standby for 5 minutes from the moment it is turned on;
at the 5th minute Panelplayer fades out the input audio signal in order to play the 00:05
bar, composed of 5 files/spots.
Once the bar has finished, Panelplayer brings the input audio signal to its precedent value
and remains in standby until reaching the 11th minute, fading in the input audio to play the
00:10 bar, composed of 3 files/spots.
IMPORTANT
:
Using the pre-amplified audio input, verify the setting of the LLIN, LLI2 and
MOMD parameters inserted in the configuration files
(par. 4.6).
Programming limits:
Max. programming permitted……………………… 1 hour (cyclic)
from 00:00 to 00:59
Max. quantity of hour bars…………………………. 60 bars
Max. quantity of commercials per bar…….…….... 8 spots/file
Max. quantity of commercials per palimpsest…… 500 spots/file
5.3 MIXER function
Panelplayer has an audio input for connection to outside music sources, with a mixer
function to mix this source with the files played by flash memory (see par. 8.3). At the time
scheduled for delivering the advertising bar, Panelplayer fades out the input audio signal
from the level LLIN to the level LLI2, according to a programmed fade TFOU. Then the
MP3 file of the bar with level LMP3 is played, mixed with the outside audio source, present
in the background with level LLI2.
Once the whole hour bar has been finished, Panelplayer brings the input audio signal back
to the level LLIN according to a programmed fade TFIN.
5.4 AVC function – automatic control of the output volume
Panelplayer has an automatic control of the output volume (parameter TAVC, par. 4.7)
which allows you to normalise the level of the audio contributions: signal from LINE IN
(radio, CD, other Panelplayer).
This allows you to make less evident any differences of levels among the various MP3 files
being played.
