DINplayer User Manual v.2.3
Page 30
8.2 Serial port communication parameters (config.txt)
The parameters of the RS485 serial port (length of the packs, parity, speed, etc.) are set
via the configuration file
config.txt
.
Example file
config.txt:
LLOU=10
LTRE=14
LBAS=10
Audio adjustment parameters
CMAD=0
CMCK=1
CMCL=0
CMBR=3
CMPR=0
CMSB=1
CMDB=8
CMDR=0
CMNR=0
RS485 serial port communication parameters
These parameters must coincide with those of the outside device with which DINplayer is to
communicate.
IMPORTANT
:
x
To make the modification of these parameters effective, it is necessary to restart DINplayer
after having introduced the flash memory with the file
config.txt.
x
If DINplayer is not used with Playlist or as music player, set MPLL=0 in the
config.txt.
IMPORTANT
:
notes for the Master system
Conditions in which a transmission sequence is initialised.
The DINplayer transmission sequence is initialised under the following conditions:
x
When DINplayer is turned on.
x
When the data communication has been normally completed.
x
When the timeout time for receiving a pack has expired.
