Apply stone adhesive here
Wing nut
Spring washer
Flat washer
L Bracket
Threaded rod
Finished view
Model No:
IB1001-XX, IT20XX-XX
Prepare counter top for installation by placing it upside down
1.
on a smooth surface.
Place undermount basin in the final position and make a mark
2.
sround it using a marker.
Apply stone adhesive (liquid nail or similar) on the top edge of
3.
basin. See fig 1.
Attach basin to counter top using the threaded rods, L
4.
brackets, flat washers, spring washers, and wing nuts as
shown in fig 1. Do not fully tight the wing nut at this step.
Use previous marking to align baisn in the final position
5.
Thighten wing nut and let adhesive dry.
6.
If neccesary, apply caulking in the inside of basin where it
7.
meets with the counter top.
Install counter top onto cabinet using silicone or similar
8.
adhesive. Check your alignments before allowing the adhesive
to dry.
Figure #1